Hey Chris,
Sorry about this. I'll check with the team and see why you haven't been
able to get in touch with anyone...

We'll follow up shortly.

Thanks,
Matt

On Fri, Jul 29, 2016 at 2:20 PM, Christopher Gray <
cg...@graytechsoftware.com> wrote:

> I've had an open ticket about the AF-2X for over a month. I have not been
> able to actually work with anyone on the issue. It has been "escalated" but
> without any positive results.
>
> Is there a better way to talk to someone about the airFiber?
>
> The spec sheet says a US AF-2X has a maximum Tx power of 30 dBm... but it
> only goes up to 24 dBm. [I'm running an 18 dBi dish on one end with long
> cables, and I need the additional 3 dB Tx power). When changing channel
> width, the Rx power does not change (Rx power is usually measured in
> dBm/20Hz on most UBNT hardware, so power usually goes up 3 dB when halving
> the bandwidth, but I can't get a straight answer as to whether they use the
> same units on the AF line).
>
> Long story short, I'm going to have to get rid of this AF-2X hardware and
> switch back to ePMP. The AF-2X would be the better choice if I could get
> the power levels I need to make this link work. I would much rather solve
> the AF problems..
>
> -Chris
>
>

Reply via email to