From what I see at my end, this still works and no problem. If
nothing has changed from your end and no one played or tweaked with your
settings, insist to speak with a senior tech.
--
*
*FOUNDER & SR. TELECOM ANALYST*
/VOIPERNETICS COMMUNICATIONS <http://www.voipernetics.com/>/*
NATION WIDE DIDS, SIP TRUNKS & VOIP 911.
PARTIAL / FULL VIRTUAL PRI - NO CONTRACTS!
HOSTED PBX & TERMINATION SERVICES.
TEL: 647-476-2067
Marc Carrafiello wrote the following on 4/14/2011 12:18 PM:
Hello Group..
Does anyone know of any recent changes (in the last 12 months) to policy
about having my Asterisk+Sangoma re-write the outgoing Caller Id Name when
it makes a call? This would be through a PRI. As per Sangoma instructions,
I've checked the SETUP message of a call by reading the output of "pri
intense debug span 1" and found that Asterisk is indeed writing the caller
id and caller id name correctly, but when people receive our calls, they
only get the caller id number; the name isn't there.
Everything incoming (name and number) is working fine.
Before I call Bell for technical support and get a non-answer from some
junior person, I figured I would check with the group. Maybe it's not
allowed anymore? I could have sworn it worked in 2007 when I setup this
PBX!
Any help would be appreciated, please& thanks,
-Marc
Protocol Discriminator: Q.931 (8) len=61
Call Ref: len= 2 (reference 3561/0xDE9) (Originator)
Message type: SETUP (5)
[04 03 80 90 a2]
Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
User information layer 1: u-Law (34)
[18 03 a1 83 96]
Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred
Dchan: 0
ChanSel: As indicated in following octets
Ext: 1 Coding: 0 Number Specified Channel Type: 3
Ext: 1 Channel: 22 ]
[28 11 b1 4d 61 72 63 20 43 61 72 72 61 66 69 65 6c 6c 6f]
Display (len=17) Charset: 31 [ Marc Carrafiello ]
[6c 0c 21 83 39 30 35 34 39 31 32 30 32 33]
Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
Presentation: Presentation allowed of network
provided number (3) '9054912023' ]
[70 0b a1 39 30 35 35 39 39 30 36 37 39]
Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '9050000000' ]
q931.c:3128 q931_setup: call 36329 on channel 22 enters state 1 (Call
Initiated)
< [ 00 01 01 c2 ]
