Reza (and Nick),

Thanks for the replies.  It looks like it is time to call Bell :P


-Marc


On Thu, Apr 14, 2011 at 1:03 PM, Reza - Voipernetics
<[email protected]>wrote:

>  From what I see at my end, this still works and no problem.   If nothing
> has changed from your end and no one played or tweaked with your settings,
> insist to speak with a senior tech.
>
> --
> *
> FOUNDER & SR. TELECOM ANALYST
> VOIPERNETICS COMMUNICATIONS <http://www.voipernetics.com/>*
> NATION WIDE DIDS, SIP TRUNKS & VOIP 911.
>  PARTIAL / FULL VIRTUAL PRI - NO CONTRACTS!
> HOSTED PBX & TERMINATION SERVICES.
> TEL:  647-476-2067
>
> Marc Carrafiello wrote the following on 4/14/2011 12:18 PM:
>
> Hello Group..
>
> Does anyone know of any recent changes (in the last 12 months) to policy
> about having my Asterisk+Sangoma re-write the outgoing Caller Id Name when
> it makes a call?  This would be through a PRI.  As per Sangoma instructions,
> I've checked the SETUP message of a call by reading the output of "pri
> intense debug span 1" and found that Asterisk is indeed writing the caller
> id and caller id name correctly, but when people receive our calls, they
> only get the caller id number; the name isn't there.
>
> Everything incoming (name and number) is working fine.
>
> Before I call Bell for technical support and get a non-answer from some
> junior person, I figured I would check with the group.  Maybe it's not
> allowed anymore?  I could have sworn it worked in 2007 when I setup this
> PBX!
>
> Any help would be appreciated, please & thanks,
>
>
> -Marc
>
>
>
>  Protocol Discriminator: Q.931 (8)  len=61
> Call Ref: len= 2 (reference 3561/0xDE9) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
>
>  capability: Speech (0)
>
>                               Ext: 1  Trans mode/rate: 64kbps, circuit-mode
>
>  (16)
>
>                                 User information layer 1: u-Law (34)
> [18 03 a1 83 96]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI  Spare: 0  Preferred
>
>   Dchan: 0
>
>                         ChanSel: As indicated in following octets
>                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
>                       Ext: 1  Channel: 22 ]
> [28 11 b1 4d 61 72 63 20 43 61 72 72 61 66 69 65 6c 6c 6f]
> Display (len=17) Charset: 31 [ Marc Carrafiello ]
> [6c 0c 21 83 39 30 35 34 39 31 32 30 32 33]
> Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI:
>
>  ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>
>                            Presentation: Presentation allowed of network
>
>  provided number (3)  '9054912023' ]
>
>  [70 0b a1 39 30 35 35 39 39 30 36 37 39]
> Called Number (len=13) [ Ext: 1  TON: National Number (2)  NPI:
>
>  ISDN/Telephony Numbering Plan (E.164/E.163) (1)  '9050000000' ]
> q931.c:3128 q931_setup: call 36329 on channel 22 enters state 1 (Call
> Initiated)
>
> < [ 00 01 01 c2 ]
>
>
>

Reply via email to