I did ath_info in one of my cards and i get MAC Revision: 2414 (0x79) Device type: 1 2GHz PHY Revision: 2413 (0x56)
/============== EEPROM Information =============\ | EEPROM Version: 5.3 | EEPROM Size: 16 kbit | | EEMAP: 2 | Reg. Domain: 0x37 | |================= Capabilities ================| | 802.11a Support: no | Turbo-A disabled: no | | 802.11b Support: yes | Turbo-G disabled: no | | 802.11g Support: yes | 2GHz XR disabled: no | | RFKill Support: no | 5GHz XR disabled: no | | 32kHz Crystal: no | | \===============================================/ /=========================================================\ | Calibration data common for all modes | |=========================================================| | CCK/OFDM gain delta: 1 | | CCK/OFDM power delta: 251 | | Scaled CCK delta: 5 | | 2GHz Antenna gain: 1 | | 5GHz Antenna gain: 0 | | Turbo 2W maximum dBm: 38 | | Target power start: 0x182 | | EAR Start: 0x1dc | \=========================================================/ /=========================================================\ | Calibration data for 802.11g operation | |=========================================================| | I power: 0x00 | Q power: 0x10 | | Use fixed bias: 0x01 | Max turbo power: 0x26 | | Max XR power: 0x22 | Switch Settling Time: 0x31 | | Tx/Rx attenuation: 0x1c | TX end to XLNA On: 0x00 | | TX end to XPA Off: 0x00 | TX end to XPA On: 0x0e | | 62db Threshold: 0x1c | XLNA gain: 0x0c | | XPD: 0x01 | XPD gain: 0x0a | | I gain: 0x00 | Tx/Rx margin: 0x19 | | False detect backoff: 0x00 | Noise Floor Threshold: -1 | | ADC desired size: -38 | PGA desired size: -80 | I deleted other things that appear to me pointless to post here. With latests driver I get this *new" "iw reg get" country AT: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS With this new info I tried: in regd_common.h this: Changing {ETSI1_WORLD, CTL_ETSI, CTL_ETSI}, Into >> {ETSI1_WORLD, CTL_FCC, CTL_FCC} Because ETSI1_WORLD = 0x37 "make unload, modprobe...etc; restart" I get the exact iwconfig output and exact "iw reg get". Please tell me what else can I try to change in the source to get the correct settings. Thanks for the help and patience!!! I don't mind hard-coding a solution into this, Let's hope all senao users can use the 600mW, also on Linux. -- omniprese...@wired® _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel