Hello Pierre, Thursday, January 18, 2007, 1:14:01 AM, you wrote:
> Hi all, > champagne !!! I got something booting 8-) Congrats! I really wondered if the issues you experienced had something to do with memory at 0xa8000000... > Here is the log : > Linux version 2.6.19-hh7 ([EMAIL PROTECTED]) (gcc version 4.1.2 20061028 > (prereleas e) (Debian 4.1.1-19)) #1 Wed Jan 17 23:44:15 CET 2007 > CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f > Machine: Dell Axim X30 > Memory policy: ECC disabled, Data cache writeback > Run Mode clock: 208.00MHz (*16) > Turbo Mode clock: 624.00MHz (*3.0, active) > Memory clock: 208.00MHz (/2) > System bus clock: 208.00MHz > CPU0: D VIVT undefined 5 cache > CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets > CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets > Built 1 zonelists. Total pages: 16256 > Kernel command line: root=/dev/ram0 rw mem=64M ramdisk_size=12288 > keepinitrd ini t=/linuxrc console=ttyS0,115200n8 > PID hash table entries: 256 (order: 8, 1024 bytes) > start_kernel(): bug: interrupts were enabled early > Console: colour dummy device 80x30 > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > Memory: 64MB = 64MB total > Memory: 62116KB available (1840K code, 823K data, 88K init) > Mount-cache hash table entries: 512 > CPU: Testing write buffer coherency: ok > asic3: using irq 160-229 on irq 44 Well, are you sure you have ASIC3 in axix50? I have to say that I doubt it. So, unless you have some grounds for its driver to be used, you should remove it from config and hopefully it will load further. > and it stops there. > The HaRet script used is attached, and the serial console is displayed So, what HaRET version did you use for this boot? > thanks to the following commands : > stty 115200 -cstopb cs8 < /dev/ttyS0 > cat /dev/ttyS0 > Pierre -- Best regards, Paul mailto:[EMAIL PROTECTED] -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
