Hello Pierre, Thursday, January 18, 2007, 9:14:59 AM, you wrote:
> Paul Sokolovsky a ecrit : >> Hello Pierre, >> >> Thursday, January 18, 2007, 1:14:01 AM, you wrote: >> >>> Hi all, >>> >>> champagne !!! I got something booting 8-) >>> >> >> Congrats! I really wondered if the issues you experienced had >> something to do with memory at 0xa8000000... >> > I agree : the key was the "set com 1" command in the HaRet script. > In fact (and hopfully), the kernel was booting since my first tests, but > I could not see it. Nice. Can you please test haret booting without following lines: ========== set mtype "655" set RAMSIZE 67108864 set RAMADDR 0xa8000000 ========== so we are sure that autodetection works ok? > Real problems with the axim are more probably coming from the (pxa)fb > driver. >> >> Well, are you sure you have ASIC3 in axix50? I have to say that I >> doubt it. So, unless you have some grounds for its driver to be used, >> you should remove it from config and hopefully it will load further. >> > I don't think either there is an ASIC3 : this configuration seems to > come from required dependencies in the modified X30 code. To be confirmed. Ok. Were there any significant changes to the patches you posted earlier? Either way, let's have it committed, so different parties could easily access up-to-date code. >> >>> The HaRet script used is attached, and the serial console is displayed >>> >> >> So, what HaRET version did you use for this boot? >> > The current HEAD version : HaRET pre-0.4.7-20070113 Ok, this should be the same as 0.4.7 release, but can you try it, so we know exact release status: http://handhelds.org/~pfalcon/haret/haret-0.4.7.exe > Pierre -- Best regards, Paul mailto:[EMAIL PROTECTED] -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
