Paul Sokolovsky a écrit : > Hello Pierre, > > Thursday, January 18, 2007, 1:14:01 AM, you wrote: > >> Hi all, >> >> champagne !!! I got something booting 8-) >> > > Congrats! I really wondered if the issues you experienced had > something to do with memory at 0xa8000000... > I agree : the key was the "set com 1" command in the HaRet script. In fact (and hopfully), the kernel was booting since my first tests, but I could not see it.
Real problems with the axim are more probably coming from the (pxa)fb driver. > > Well, are you sure you have ASIC3 in axix50? I have to say that I > doubt it. So, unless you have some grounds for its driver to be used, > you should remove it from config and hopefully it will load further. > I don't think either there is an ASIC3 : this configuration seems to come from required dependencies in the modified X30 code. To be confirmed. > >> The HaRet script used is attached, and the serial console is displayed >> > > So, what HaRET version did you use for this boot? > The current HEAD version : HaRET pre-0.4.7-20070113 Pierre
-- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
