Hello Paul, Paul Sokolovsky a écrit : > Hello Pierre, > Can you please test haret booting without following lines: > > ========== > set mtype "655" > set RAMSIZE 67108864 > set RAMADDR 0xa8000000 > ========== > > so we are sure that autodetection works ok? > It does not work :
set mtype "655" seems to be still required. Note that I am starting a new aximx50 folder in arch/arm/mach-pxa for x50/x51(v) family, as we talked about. So the right line should be now : set mtype "740" > > >> Real problems with the axim are more probably coming from the (pxa)fb >> driver. >> >>> >>> Well, are you sure you have ASIC3 in axix50? I have to say that I >>> doubt it. So, unless you have some grounds for its driver to be used, >>> you should remove it from config and hopefully it will load further. >>> >>> >> I don't think either there is an ASIC3 : this configuration seems to >> come from required dependencies in the modified X30 code. To be confirmed. >> > > Ok. Were there any significant changes to the patches you posted > earlier? Either way, let's have it committed, so different parties > could easily access up-to-date code. > None ! As I said, even the old 2.6.16 kernel was booting. I am working on an equivalent 2.6.19 hh configuration now. Of course, I'll commit it (aka send it to the mailing list ;-)) as soon as possible. In fact I do not understand : the X50 code patch I got from http://x50v.imploder.org/?page_id=7 was clearly driving an ASIC3 ! Does anybody know why ? I guess the port was uncomplete and this code was coming from an initial copy/paste, but I may be wrong... > >>>> The HaRet script used is attached, and the serial console is displayed >>>> >>>> >>> So, what HaRET version did you use for this boot? >>> >>> >> The current HEAD version : HaRET pre-0.4.7-20070113 >> > > Ok, this should be the same as 0.4.7 release, but can you try it, > so we know exact release status: > http://handhelds.org/~pfalcon/haret/haret-0.4.7.exe > These latest tests have been done using this executable. Pierre
-- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
