Oh, reading the error message again, did you set "heartbeat interval = 300" between Dir and SD? Your error message is from the SD.
I don't know if FD will communicate directly with SD or if data from Fd goes through dir to SD. Robert Gerber 402-237-8692 r...@craeon.net On Fri, Nov 3, 2023, 2:15 PM Rob Gerber <r...@craeon.net> wrote: > Lionel, > > I found this post from 10 years ago. That user had a similar problem. Kern > suggested add "Heartbeat Interval = 300" to the appropriate resources on > both sides (dir and FD in your case). I see you mentioned setting > heartbeat, did you set it on both sides? > > Source: old post to this list > > https://bacula-users.narkive.com/i6Y7gQ1J/lib-bsock-c-397-write-error-sending-1-bytes-to-storage-daemon > > > Robert Gerber > 402-237-8692 > r...@craeon.net > > On Fri, Nov 3, 2023, 1:51 PM Lionel PLASSE <pla...@cofiem.fr> wrote: > >> Hello , >> >> I am losing connection between sd and windows fd and I don't understand >> why. >> The machine lose every time the connection, sometimes after an hour and >> often after 2 hours of job. >> And the transfer rate is so slow around 3 to 5 Mb/s (instead of up to 50 >> in >> other configurations) >> >> I tried many Network Maximum Rate values (32768 and higher and smaller) >> but >> every time I have more byte written to client (65566 > 65536) and >> connection >> fall down. >> >> The server is in win2019 version with bacula-fd win32 v13 and the Bacula >> Dir is in v13.0.3 on a Debian 12 (with libssl1.1 and 6.1.0-13-amd kernel) >> >> I before was using bacula v9.6 and all wad good through my Lan network >> when >> backing up this same windows server. >> >> I am now using a Debian server in a different place, through a site to >> site >> permanent ipsec VPN ( general upload wan bandwith 80Mb/s) >> The jobs are good for the other machines (win2012-r2 & Debian 10) which >> reach a rate of 10 up to 30 Mb/s depending the time and size of files >> backed >> up. >> >> But for this one (and another one in win2008-r2) : >> serv-dc-01-fd JobId 122: Fatal error: filed/backup.c:1008 Network send >> error >> to SD. ERR=Input/output error >> serv-dc-01-fd JobId 122: Error: lib/bsock.c:397 Wrote 65566 bytes to >> client:192.168.0.4:9102, but only 65536 accepted >> >> I check full duplex, opened firewall port, tcp_keep_alive & heartbeat, >> changed net buffer size, installed last driver . >> >> Any suggestion ? >> _______________________________________________ >> Bacula-users mailing list >> Bacula-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/bacula-users >> >
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users