Hi guys, I have configured the distribution between R8 AND cat1. R8 is the ASBR that contained both ospf processes ( ospf 1 and ospf 2).
However on R1 I do not see the route 150.100.81.0 NOR 200.0.0.11 on the routing table of R1. CAN anyone tell me why ? below are my configurations. R8 -ASBR area 78 stub redistribute ospf 2 subnets ----------------------> the distribution statement bet R8 OSPF and CAT OSPF process. passive-interface default no passive-interface FastEthernet0/0 no passive-interface Serial0/0 no passive-interface FastEthernet0/1 network 100.100.200.0 0.0.0.255 area 200 network 150.100.78.0 0.0.0.255 area 78 network 150.100.178.0 0.0.0.255 area 78 router ospf 2 log-adjacency-changes redistribute ospf 1 subnets passive-interface default no passive-interface FastEthernet0/1 network 150.100.81.0 0.0.0.255 area 0 CAT 1 router ospf 2 log-adjacency-changes passive-interface default no passive-interface FastEthernet0/1 network 150.100.81.0 0.0.0.255 area 0 network 200.0.0.11 0.0.0.0 area 0 Best regards, khaled _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
