Correction, the 150.100.81.0; not the 78 network off of router ospf 1 Apologies. On Feb 13, 2012 8:06 AM, "Debra Taylor" <[email protected]> wrote:
> Hello Khaled, > > Vol 1, 10 is an interesting lab. In order to gain full reachability, I > took the 150.100.78.0 0.0.0.255 area 78 off of the router ospf 1 process on > R8. I left the router ospf 2; 150.100.78.0 0.0.0.255 area 0 on R8. Hope > this helps. > > Deb > On Feb 13, 2012 1:49 AM, "khaled al-ajeman" <[email protected]> > wrote: > >> Hi There, >> >> According to the ipexpert workbook volume # 1 lab 10 question # 10.12-- we >> have to configure area 78 which is between R7 AND R8 >> as STUB area ( the question does not allow LSA 4 AND LSA 5. Therefore, I >> am no allowed to configure area 78 as NSSA area, I hope this >> is understood clearly. Secondly, I am being able to see route route >> 200.0.0.11 on R8 only but on the other routers. >> >> thanks so much, >> >> >> khaled >> >> On Mon, Feb 13, 2012 at 2:38 AM, Oluwagbenga Oyebande < >> [email protected]> wrote: >> >> > I think you are referring to the *re*distribution in Vol 1 Lab 9 >> > >> > Do you see see the route to 200.0.0.11 on R8, R7 and R2? >> > >> > >> > >> > >> > >> > >> > >> > On Sun, Feb 12, 2012 at 9:21 AM, khaled al-ajeman < >> > [email protected]> wrote: >> > >> >> Hi guys, >> >> >> >> I have configured the distribution between R8 AND cat1. R8 is the ASBR >> >> that contained both ospf processes ( ospf 1 and ospf 2). >> >> >> >> However on R1 I do not see the route 150.100.81.0 NOR 200.0.0.11 on the >> >> routing table of R1. CAN anyone tell me why ? below are my >> configurations. >> >> >> >> R8 -ASBR >> >> router ospf 1 >> >> area 78 stub >> >> redistribute ospf 2 subnets ----------------------> the >> distribution >> >> statement bet R8 OSPF and CAT OSPF process. >> >> passive-interface default >> >> no passive-interface FastEthernet0/0 >> >> no passive-interface Serial0/0 >> >> no passive-interface FastEthernet0/1 >> >> network 100.100.200.0 0.0.0.255 area 200 >> >> network 150.100.78.0 0.0.0.255 area 78 >> >> network 150.100.178.0 0.0.0.255 area 78 >> >> router ospf 2 >> >> log-adjacency-changes >> >> redistribute ospf 1 subnets >> >> passive-interface default >> >> no passive-interface FastEthernet0/1 >> >> network 150.100.81.0 0.0.0.255 area 0 >> >> >> >> >> >> CAT 1 >> >> >> >> >> >> router ospf 2 >> >> log-adjacency-changes >> >> passive-interface default >> >> no passive-interface FastEthernet0/1 >> >> network 150.100.81.0 0.0.0.255 area 0 >> >> network 200.0.0.11 0.0.0.0 area 0 >> >> Best regards, >> >> >> >> khaled >> >> >> > _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> >> Are you a CCNP or CCIE and looking for a job? Check out >> >> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> >> >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> >> >> > >> > >> > >> > -- >> > -- >> > Olugbenga Oyebande >> > MD, DAIT >> > 234-803-302-5287 >> > http://www.dait-ng.com >> > Cisco Networks, Network Security & Quality of Service >> > DAIT Linux Enterprise Network Servers, Web Portal Projects >> > Broadband Internet Deployment & ISP Consultancy >> > >> > >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
