Hi There, According to the ipexpert workbook volume # 1 lab 10 question # 10.12-- we have to configure area 78 which is between R7 AND R8 as STUB area ( the question does not allow LSA 4 AND LSA 5. Therefore, I am no allowed to configure area 78 as NSSA area, I hope this is understood clearly. Secondly, I am being able to see route route 200.0.0.11 on R8 only but on the other routers.
thanks so much, khaled On Mon, Feb 13, 2012 at 2:38 AM, Oluwagbenga Oyebande < [email protected]> wrote: > I think you are referring to the *re*distribution in Vol 1 Lab 9 > > Do you see see the route to 200.0.0.11 on R8, R7 and R2? > > > > > > > > On Sun, Feb 12, 2012 at 9:21 AM, khaled al-ajeman < > [email protected]> wrote: > >> Hi guys, >> >> I have configured the distribution between R8 AND cat1. R8 is the ASBR >> that contained both ospf processes ( ospf 1 and ospf 2). >> >> However on R1 I do not see the route 150.100.81.0 NOR 200.0.0.11 on the >> routing table of R1. CAN anyone tell me why ? below are my configurations. >> >> R8 -ASBR >> router ospf 1 >> area 78 stub >> redistribute ospf 2 subnets ----------------------> the distribution >> statement bet R8 OSPF and CAT OSPF process. >> passive-interface default >> no passive-interface FastEthernet0/0 >> no passive-interface Serial0/0 >> no passive-interface FastEthernet0/1 >> network 100.100.200.0 0.0.0.255 area 200 >> network 150.100.78.0 0.0.0.255 area 78 >> network 150.100.178.0 0.0.0.255 area 78 >> router ospf 2 >> log-adjacency-changes >> redistribute ospf 1 subnets >> passive-interface default >> no passive-interface FastEthernet0/1 >> network 150.100.81.0 0.0.0.255 area 0 >> >> >> CAT 1 >> >> >> router ospf 2 >> log-adjacency-changes >> passive-interface default >> no passive-interface FastEthernet0/1 >> network 150.100.81.0 0.0.0.255 area 0 >> network 200.0.0.11 0.0.0.0 area 0 >> Best regards, >> >> khaled >> > _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > > > > -- > -- > Olugbenga Oyebande > MD, DAIT > 234-803-302-5287 > http://www.dait-ng.com > Cisco Networks, Network Security & Quality of Service > DAIT Linux Enterprise Network Servers, Web Portal Projects > Broadband Internet Deployment & ISP Consultancy > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
