you may need to *no passive* the tunnel interface on R8 and put it in area 0.
On Mon, Feb 13, 2012 at 7:24 AM, khaled al-ajeman <[email protected] > wrote: > Hi There, > > According to the ipexpert workbook volume # 1 lab 10 question # 10.12-- we > have to configure area 78 which is between R7 AND R8 > as STUB area ( the question does not allow LSA 4 AND LSA 5. Therefore, I > am no allowed to configure area 78 as NSSA area, I hope this > is understood clearly. Secondly, I am being able to see route route > 200.0.0.11 on R8 only but on the other routers. > > thanks so much, > > > khaled > > On Mon, Feb 13, 2012 at 2:38 AM, Oluwagbenga Oyebande < > [email protected]> wrote: > >> I think you are referring to the *re*distribution in Vol 1 Lab 9 >> >> Do you see see the route to 200.0.0.11 on R8, R7 and R2? >> >> >> >> >> >> >> >> On Sun, Feb 12, 2012 at 9:21 AM, khaled al-ajeman < >> [email protected]> wrote: >> >>> Hi guys, >>> >>> I have configured the distribution between R8 AND cat1. R8 is the ASBR >>> that contained both ospf processes ( ospf 1 and ospf 2). >>> >>> However on R1 I do not see the route 150.100.81.0 NOR 200.0.0.11 on the >>> routing table of R1. CAN anyone tell me why ? below are my >>> configurations. >>> >>> R8 -ASBR >>> router ospf 1 >>> >>> area 78 stub >>> redistribute ospf 2 subnets ----------------------> the distribution >>> statement bet R8 OSPF and CAT OSPF process. >>> passive-interface default >>> no passive-interface FastEthernet0/0 >>> no passive-interface Serial0/0 >>> no passive-interface FastEthernet0/1 >>> network 100.100.200.0 0.0.0.255 area 200 >>> network 150.100.78.0 0.0.0.255 area 78 >>> network 150.100.178.0 0.0.0.255 area 78 >>> router ospf 2 >>> log-adjacency-changes >>> redistribute ospf 1 subnets >>> passive-interface default >>> no passive-interface FastEthernet0/1 >>> network 150.100.81.0 0.0.0.255 area 0 >>> >>> >>> CAT 1 >>> >>> >>> router ospf 2 >>> log-adjacency-changes >>> passive-interface default >>> no passive-interface FastEthernet0/1 >>> network 150.100.81.0 0.0.0.255 area 0 >>> network 200.0.0.11 0.0.0.0 area 0 >>> Best regards, >>> >>> khaled >>> >> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, >>> please visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >>> >>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >>> >> >> >> >> -- >> -- >> Olugbenga Oyebande >> MD, DAIT >> 234-803-302-5287 >> http://www.dait-ng.com >> Cisco Networks, Network Security & Quality of Service >> DAIT Linux Enterprise Network Servers, Web Portal Projects >> Broadband Internet Deployment & ISP Consultancy >> >> > -- -- Olugbenga Oyebande MD, DAIT 234-803-302-5287 http://www.dait-ng.com Cisco Networks, Network Security & Quality of Service DAIT Linux Enterprise Network Servers, Web Portal Projects Broadband Internet Deployment & ISP Consultancy _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
