Hi all, i am in VOL 2 LAB 15 . below is the task.
configure CBWFQ on R5 interface S0/1/0.2 and PVC between R5 and R6 . The following packets routerd to MPLS core must be allocated a bandwidth . IPP 5 should be allocated 30 % of bandwidth IPP 4 should be allocated 20 % of bandwidth Ensure the policy map is applied to pvc and not to subinterface. Question : in soluiton we have CBWFQ policy map applied under a map-class for that pvc . however we know that when enabling CBWFQ on a pvc we MUST have FRTS enabled first . their is no FRTS in solution . from cco : Configure a service-policy within a Frame Relay map-class and enable per-VC queueing with the *frame-relay traffic-shaping* command. You can apply the map-class to the VC. http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008009489a.shtml Any ideas guys ? _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
