guys either my understanding is wrong ..or could be task. i hope you all understood my query .
On Tue, Sep 4, 2012 at 8:53 AM, Imran Ali <[email protected]> wrote: > Hi all, > > i am in VOL 2 LAB 15 . below is the task. > > configure CBWFQ on R5 interface S0/1/0.2 and PVC between R5 and R6 . > The following packets routerd to MPLS core must be allocated a bandwidth . > > IPP 5 should be allocated 30 % of bandwidth > IPP 4 should be allocated 20 % of bandwidth > > Ensure the policy map is applied to pvc and not to subinterface. > > > Question : in soluiton we have CBWFQ policy map applied under a map-class > for that pvc . > > however we know that when enabling CBWFQ on a pvc we MUST have FRTS > enabled first . their is no FRTS in solution . > > from cco : > Configure a service-policy within a Frame Relay map-class and enable > per-VC queueing with the *frame-relay traffic-shaping* command. You can > apply the map-class to the VC. > > > http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008009489a.shtml > > > Any ideas guys ? > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
