No problem. That seems like a fair statement.
________________________________ From: Imran Ali <[email protected]> To: Rob Pool <[email protected]> Cc: "[email protected]" <[email protected]> Sent: Tuesday, September 4, 2012 6:48 PM Subject: Re: [OSL | CCIE_RS] wrong solution ?? thanks for doc, i guess you call this kind of frts as MQC FRTS . On Wed, Sep 5, 2012 at 1:30 AM, Rob Pool <[email protected]> wrote: That's a pretty old document that covers old hardware platforms. I'd refer you to the doc cd 12.4T ios. I've included an excerpt. > >http://www.cisco.com/en/US/docs/ios/wan/configuration/guide/wan_mqc_fr_tfshp_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1056693 > > >Configuring Class-Based Weighted Fair Queueing Example >The following example provides a sample configuration for CBWFQ with FRTS: >class-map voice >match ip dscp ef >policy-map llq >class voice >priority 32 >policy-map shape-policy-map >class class-default >shape average 64000 >shape adaptive 32000 >service-policy llq >map-class frame-relay shape-map-class > service-policy output shape-policy-map >interface serial 0/0 >encapsulation frame-relay >interface serial 0/0.1 point-to-point >ip address 192.168.1.1 255.255.255.0 >frame-relay interface-dlci 100 >class shape-map-class > > > > > > >________________________________ > From: Imran Ali <[email protected]> >To: Rob Pool <[email protected]> >Cc: "[email protected]" <[email protected]> >Sent: Tuesday, September 4, 2012 6:07 PM >Subject: Re: [OSL | CCIE_RS] wrong solution ?? > > > >Cisco 7500 Series >Cisco 7200, 2600/3600 Series, and Other Platforms >Main Interface Configure a service policy on the main interface Supported only >if Frame Relay TS is not enabled and the queueing mechanisms apply to a single interface pipe. >Subinterface Configure a servicepolicy on the subinterface. Configure a >service policy within a Frame Relay map-class and enable per-VC queueing with the frame-relay traffic-shaping command. You can apply the map-class to the subinterface. >VC Level Configure a service-policy within a Frame Relay map-class and enable >per-VC queueing with the frame-relay traffic-shaping command. You can apply the map-class to the VC. > > >w.r.t VC Level .. it does requires FRTS . check the link in previous mail. > >i guess ONLY under main interface we can apply CBWFQ . But not on a PVC or a >sub-interface. > > >thanks > > > >On Wed, Sep 5, 2012 at 12:49 AM, Rob Pool <[email protected]> wrote: > >I believe you may be mistaken. I don't believe there is any requirement to >configure FRTS on the interface to use CBWFQ under a map-class. >> >>Sent from my iPhone >> >> >>On Sep 4, 2012, at 5:27 PM, Imran Ali <[email protected]> wrote: >> >>> guys either my understanding is wrong ..or could be task. >>> >>> i hope you all understood my query . >>> >>> On Tue, Sep 4, 2012 at 8:53 AM, Imran Ali <[email protected]> wrote: >>> >>>> Hi all, >>>> >>>> i am in VOL 2 LAB 15 . below is the task. >>>> >>>> configure CBWFQ on R5 interface S0/1/0.2 and PVC between R5 and R6 . >>>> The following packets routerd to MPLS core must be allocated a bandwidth . >>>> >>>> IPP 5 should be allocated 30 % of bandwidth >>>> IPP 4 should be allocated 20 % of bandwidth >>>> >>>> Ensure the policy map is applied to pvc and not to subinterface. >>>> >>>> >>>> Question : in soluiton we have CBWFQ policy map applied under a map-class >>>> for that pvc . >>>> >>>> however we know that when enabling CBWFQ on a pvc we MUST have FRTS >>>> enabled first . their is no FRTS in solution . >>>> >>>> from cco : >>>> Configure a service-policy within a Frame Relay map-class and enable >>>> per-VC queueing with the *frame-relay traffic-shaping* command. You can >> >>>> apply the map-class to the VC. >>>> >>>> >>>> http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008009489a.shtml >>>> >>>> >>>> Any ideas guys ? >>>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >>> >>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
