More like "ip routing" that is what is required to enable routing on switches. Without that, no show. :D
Sent from my iPhone On Dec 17, 2012, at 17:04, Ahmed Hussain <[email protected]> wrote: > maybe global config command > > ip unicast routing > > On Mon, Dec 17, 2012 at 8:48 PM, waheed Ahmed <[email protected]>wrote: > >> >> >> Dear Team , >> >> >> I am facing problem that i want to configure routing between two 3560 >> Switches as given topology . But it is not working still and configuration >> of Switches are mentioned below . Waiting for some corrections in my >> configuration . >> >> >> Switch#show running-config >> Building configuration... >> >> Current configuration : 1436 bytes >> ! >> version 12.2 >> no service timestamps log datetime msec >> no service timestamps debug datetime msec >> no service password-encryption >> ! >> hostname Switch1 >> ! >> ! >> spanning-tree mode pvst >> ! >> interface FastEthernet0/1 >> ! >> interface FastEthernet0/2 >> switchport access vlan 2 >> ! >> interface FastEthernet0/3 >> switchport access vlan 3 >> ! >> interface FastEthernet0/4 >> switchport access vlan 4 >> ! >> interface FastEthernet0/9 >> ! >> interface FastEthernet0/10 >> switchport access vlan 10 >> ! >> interface FastEthernet0/23 >> switchport trunk encapsulation dot1q >> ! >> interface GigabitEthernet0/2 >> ! >> interface Vlan1 >> no ip address >> shutdown >> ! >> interface Vlan2 >> ip address 192.168.2.3 255.255.255.0 >> ! >> interface Vlan3 >> ip address 192.168.3.3 255.255.255.0 >> ! >> interface Vlan4 >> ip address 192.168.4.3 255.255.255.0 >> ! >> interface Vlan10 >> ip address 192.168.10.3 255.255.255.0 >> ! >> ip classless >> ! >> ! >> ! >> line con 0 >> line vty 0 4 >> login >> ! >> ! >> ! >> end >> >> >> Switch# >> >> >> =================================== >> >> Switch#show run >> Building configuration... >> >> ! >> hostname Switch0 >> ! >> ! >> spanning-tree mode pvst >> ! >> ! >> interface FastEthernet0/1 >> ! >> interface FastEthernet0/2 >> switchport access vlan 2 >> ! >> interface FastEthernet0/3 >> switchport access vlan 3 >> ! >> interface FastEthernet0/4 >> switchport access vlan 4 >> ! >> ! >> interface FastEthernet0/10 >> switchport access vlan 10 >> ! >> >> interface FastEthernet0/20 >> switchport access vlan 10 >> ! >> interface FastEthernet0/21 >> ! >> interface FastEthernet0/22 >> ! >> interface FastEthernet0/23 >> switchport trunk encapsulation dot1q >> ! >> interface FastEthernet0/24 >> ! >> interface GigabitEthernet0/1 >> ! >> interface GigabitEthernet0/2 >> ! >> interface Vlan1 >> no ip address >> shutdown >> ! >> interface Vlan2 >> ip address 192.168.2.2 255.255.255.0 >> ! >> interface Vlan3 >> ip address 192.168.3.2 255.255.255.0 >> ! >> interface Vlan4 >> ip address 192.168.4.2 255.255.255.0 >> ! >> interface Vlan10 >> ip address 192.168.10.2 255.255.255.0 >> ! >> ip classless >> ! >> line con 0 >> line vty 0 4 >> login >> ! >> end >> >> >> >> >> With Regards >> Waheed Ahmed >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
