Yes ping is not working... Packet tracer file is attached herewith ........ 
for reference please. 



 
 


With Regards
Waheed Ahmed
+971-55-7720310


________________________________
 From: Oshin Sanjo <[email protected]>
To: waheed Ahmed <[email protected]> 
Cc: "[email protected]" <[email protected]> 
Sent: Monday, December 17, 2012 9:24 PM
Subject: Re: [OSL | CCIE_RS] Fw:  VLAN routing on MLS
 

So now what are you trying to reach that your pings are failing???

Sent from my iPhone

On Dec 17, 2012, at 18:21, waheed Ahmed <[email protected]> wrote:


Thanks Oshin, 
>
>Switch#show ip route 
>Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
>       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
>       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
>       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
>       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
>       * - candidate default, U - per-user static route, o - ODR
>       P - periodic downloaded static route
>
>Gateway of last resort is not set
>
>C    192.168.2.0/24 is directly connected, Vlan2
>C   
 192.168.3.0/24 is directly connected, Vlan3
>C    192.168.4.0/24 is directly connected, Vlan4
>C    192.168.10.0/24 is directly connected, Vlan10
>
>
>Switch#show ip interface brief 
>Interface              IP-Address      OK? Method Status                
>Protocol
> 
>FastEthernet0/1        unassigned      YES NVRAM  down                  down
> 
>FastEthernet0/2        unassigned      YES NVRAM  up                   
 up
> 
>FastEthernet0/3        unassigned      YES NVRAM  up                    up
> 
>FastEthernet0/4        unassigned      YES NVRAM  up                    up
> 
>FastEthernet0/10       unassigned      YES NVRAM  up                    up
> 
>FastEthernet0/20       unassigned      YES NVRAM 
 up                    up
> 
>FastEthernet0/21       unassigned      YES NVRAM  down                  down
> 
>FastEthernet0/22       unassigned      YES NVRAM  down                  down
> 
>FastEthernet0/23       unassigned      YES NVRAM  up                    up
> 
>FastEthernet0/24       unassigned      YES NVRAM 
 down                  down
> 
>GigabitEthernet0/1     unassigned      YES NVRAM  down                  down
> 
>GigabitEthernet0/2     unassigned      YES NVRAM  down                  down
> 
>Vlan1                  unassigned      YES NVRAM  up                   
 up
> 
>Vlan2                  192.168.2.2     YES manual up                    up
> 
>Vlan3                  192.168.3.2     YES manual up                    up
> 
>Vlan4                  192.168.4.2     YES manual up                   
 up
> 
>Vlan10                 192.168.10.2    YES manual up                    up
>Switch# 
>
>
>
>
> 
> 
> 
>
>
>
>With Regards
>Waheed Ahmed
>+971-55-7720310
>
>
>
>________________________________
> From: Oshin Sanjo <[email protected]>
>To: waheed Ahmed <[email protected]> 
>Cc: "[email protected]" <[email protected]> 
>Sent: Monday, December 17, 2012 9:02 PM
>Subject: Re: [OSL | CCIE_RS] Fw:  VLAN routing on MLS
> 
>What i mean is. 
>
>Input the command "sh ip route". I want to see the output. 
>
>Also, what are the status of the vlan interfaces?? That is vlan 2,3,4 and 10. 
>You can do a "sh ip int bri" 
>
>We can work through together. 
>
>Sent from my iPhone
>
>On Dec 17, 2012, at 17:47, waheed Ahmed <[email protected]> wrote:
>
>> IP routing is enabled on both MLS and trunk links shown working on both 
>> sides.
>> 
>> 
>> 
>>  Switch#show interfaces trunk 
>> Port        Mode         Encapsulation  Status        Native vlan
>> Fa0/23      on           802.1q        
>> trunking      1
>> 
>> Port        Vlans allowed on trunk
>>
 Fa0/23      1-1005
>> 
>> Port        Vlans allowed and active in management domain
>> Fa0/23      1,2,3,4,10
>> 
>> Port        Vlans in spanning tree forwarding state and not pruned
>> Fa0/23      none
>> Switch#
>> 
>>  
>>  Switch#  show spanning-tree summary 
>> Switch is in pvst mode
>> Root bridge for: default Accounts Sales Managemetn HR
>> Extended system ID           is enabled
>> Portfast
>> Default             is disabled
>> PortFast BPDU Guard Default  is disabled
>> Portfast BPDU Filter Default is disabled
>> Loopguard Default            is disabled
>> EtherChannel misconfig guard is disabled
>> UplinkFast             
      is disabled
>> BackboneFast                 is disabled
>> Configured Pathcost method used is short
>> 
>> Name                   Blocking Listening Learning Forwarding STP Active
>> ---------------------- -------- --------- -------- ----------
>> ----------
>> VLAN0001                     0         0        0          2          2
>> VLAN0002                     0         0        0          1          1
>> VLAN0003                     0         0      
>> 0          1          1
>> VLAN0004                     0         0        0          1          1
>> VLAN0010                     0         0        0          1          1
>> 
>> ---------------------- -------- --------- -------- ---------- ----------
>> 5
>> vlans                      0         0        0          6          6
>> 
>> 
>> With Regards
>> Waheed Ahmed
>> +971-55-7720310
>> 
>> 
>>
 ________________________________
>> From: ankit thakrar <[email protected]>
>> To: waheed Ahmed <[email protected]> 
>> Cc: "[email protected]" <[email protected]> 
>> Sent: Monday, December 17, 2012 8:19 PM
>> Subject: Re: [OSL | CCIE_RS] VLAN routing on MLS
>> 
>> 
>> Dear Ahmed,
>> 
>> Have you enable ip routing on both the switches to have layer 3 routing 
>> working.
>> 
>> 
>> Regards,
>> Ankit
>> 
>> 
>> On Mon, Dec 17, 2012 at 9:18 PM, waheed Ahmed <[email protected]> wrote:
>> 
>> 
>>> 
>>> Dear Team ,
>>> 
>>> 
>>> I am facing problem that i want to configure routing between two 3560 
>>> Switches as given topology . But it is not working still and configuration 
>>> of Switches are mentioned below . Waiting for some corrections in my 
>>> configuration .
>>> 
>>> 
>>> Switch#show running-config
>>> Building configuration...
>>> 
>>> Current configuration : 1436 bytes
>>> !
>>> version 12.2
>>> no service timestamps log datetime msec
>>> no service timestamps debug datetime msec
>>> no service password-encryption
>>> !
>>> hostname Switch1
>>> !
>>> ip routing 
>>> !
>>> spanning-tree mode pvst
>>> !
>>> interface
 FastEthernet0/1
>>> !
>>> interface FastEthernet0/2
>>>  switchport access vlan 2
>>> !
>>> interface FastEthernet0/3
>>>  switchport access vlan 3
>>> !
>>> interface FastEthernet0/4
>>>  switchport access vlan 4
>>> !
>>>  interface FastEthernet0/9
>>> !
>>> interface FastEthernet0/10
>>>  switchport access vlan 10
>>>  !
>>> interface FastEthernet0/23
>>>  switchport trunk encapsulation dot1q
>>>  !
>>> interface GigabitEthernet0/2
>>> !
>>> interface Vlan1
>>>  no ip address
>>>  shutdown
>>> !
>>> interface Vlan2
>>>  ip address 192.168.2.3 255.255.255.0
>>> !
>>> interface Vlan3
>>>  ip address 192.168.3.3 255.255.255.0
>>> !
>>> interface
 Vlan4
>>>  ip address 192.168.4.3 255.255.255.0
>>> !
>>> interface Vlan10
>>>  ip address 192.168.10.3 255.255.255.0
>>> !
>>> ip classless
>>> !
>>> !
>>> !
>>> line con 0
>>> line vty 0 4
>>>  login
>>> !
>>> !
>>> !
>>> end
>>> 
>>> 
>>> Switch#
>>> 
>>> 
>>>  ===================================
>>>  
>>>  Switch#show run
>>> Building configuration...
>>> 
>>>  !
>>> hostname Switch0
>>> !
>>> 
>>> ip routing 
>>> !
>>> spanning-tree mode pvst
>>> !
>>> !
>>> interface FastEthernet0/1
>>> !
>>> interface FastEthernet0/2
>>>  switchport access vlan 2
>>> !
>>> interface
 FastEthernet0/3
>>>  switchport access vlan 3
>>> !
>>> interface FastEthernet0/4
>>>  switchport access vlan 4
>>> !
>>>  !
>>> interface FastEthernet0/10
>>>  switchport access vlan 10
>>> !
>>>  
>>> interface FastEthernet0/20
>>>  switchport access vlan 10
>>> !
>>> interface FastEthernet0/21
>>> !
>>> interface FastEthernet0/22
>>> !
>>> interface FastEthernet0/23
>>>  switchport trunk encapsulation dot1q
>>> !
>>> interface FastEthernet0/24
>>> !
>>> interface GigabitEthernet0/1
>>> !
>>> interface GigabitEthernet0/2
>>> !
>>> interface Vlan1
>>>  no ip address
>>>  shutdown
>>> !
>>> interface Vlan2
>>>  ip address 192.168.2.2
 255.255.255.0
>>> !
>>> interface Vlan3
>>>  ip address 192.168.3.2 255.255.255.0
>>> !
>>> interface Vlan4
>>>  ip address 192.168.4.2 255.255.255.0
>>> !
>>> interface Vlan10
>>>  ip address 192.168.10.2 255.255.255.0
>>> !
>>> ip classless
>>>  !
>>> line con 0
>>> line vty 0 4
>>>  login
>>> !
>>> end
>>> 
>>> 
>>> 
>>> 
>>> With Regards
>>> Waheed Ahmed
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training, please 
>>> visit www.ipexpert.com
>>> 
>>> Are you a CCNP or CCIE and looking for a job? Check out 
>>> www.PlatinumPlacement.com
>>> 
>>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>>> 
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>> 
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
>> 
>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to