IP routing is enabled on both MLS and trunk links shown working on both sides.



 Switch#show interfaces trunk 
Port        Mode         Encapsulation  Status        Native vlan
Fa0/23      on           802.1q         trunking      1

Port        Vlans allowed on trunk
Fa0/23      1-1005

Port        Vlans allowed and active in management domain
Fa0/23      1,2,3,4,10

Port        Vlans in spanning tree forwarding state and not pruned
Fa0/23      none
Switch#

 
 Switch#  show spanning-tree summary 
Switch is in pvst mode
Root bridge for: default Accounts Sales Managemetn HR
Extended system ID           is enabled
Portfast Default             is disabled
PortFast BPDU Guard Default  is disabled
Portfast BPDU Filter Default is disabled
Loopguard Default            is disabled
EtherChannel misconfig guard is disabled
UplinkFast                   is disabled
BackboneFast                 is disabled
Configured Pathcost method used is short

Name                   Blocking Listening Learning Forwarding STP Active
---------------------- -------- --------- -------- ---------- ----------
VLAN0001                     0         0        0          2          2
VLAN0002                     0         0        0          1          1
VLAN0003                     0         0        0          1          1
VLAN0004                     0         0        0          1          1
VLAN0010                     0         0        0          1          1

---------------------- -------- --------- -------- ---------- ----------
5 vlans                      0         0        0          6          6


With Regards
Waheed Ahmed
+971-55-7720310


________________________________
 From: ankit thakrar <[email protected]>
To: waheed Ahmed <[email protected]> 
Cc: "[email protected]" <[email protected]> 
Sent: Monday, December 17, 2012 8:19 PM
Subject: Re: [OSL | CCIE_RS] VLAN routing on MLS
 

Dear Ahmed,

Have you enable ip routing on both the switches to have layer 3 routing working.


Regards,
Ankit


On Mon, Dec 17, 2012 at 9:18 PM, waheed Ahmed <[email protected]> wrote:


>
>Dear Team ,
>
>
>I am facing problem that i want to configure routing between two 3560 Switches 
>as given topology . But it is not working still and configuration of Switches 
>are mentioned below . Waiting for some corrections in my configuration .
>
>
>Switch#show running-config
>Building configuration...
>
>Current configuration : 1436 bytes
>!
>version 12.2
>no service timestamps log datetime msec
>no service timestamps debug datetime msec
>no service password-encryption
>!
>hostname Switch1
>!
>!
>spanning-tree mode pvst
>!
>interface FastEthernet0/1
>!
>interface FastEthernet0/2
> switchport access vlan 2
>!
>interface FastEthernet0/3
> switchport access vlan 3
>!
>interface FastEthernet0/4
> switchport access vlan 4
>!
> interface FastEthernet0/9
>!
>interface FastEthernet0/10
> switchport access vlan 10
> !
>interface FastEthernet0/23
> switchport trunk encapsulation dot1q
> !
>interface GigabitEthernet0/2
>!
>interface Vlan1
> no ip address
> shutdown
>!
>interface Vlan2
> ip address 192.168.2.3 255.255.255.0
>!
>interface Vlan3
> ip address 192.168.3.3 255.255.255.0
>!
>interface Vlan4
> ip address 192.168.4.3 255.255.255.0
>!
>interface Vlan10
> ip address 192.168.10.3 255.255.255.0
>!
>ip classless
>!
>!
>!
>line con 0
>line vty 0 4
> login
>!
>!
>!
>end
>
>
>Switch#
>
>
> ===================================
> 
> Switch#show run
>Building configuration...
>
> !
>hostname Switch0
>!
>!
>spanning-tree mode pvst
>!
>!
>interface FastEthernet0/1
>!
>interface FastEthernet0/2
> switchport access vlan 2
>!
>interface FastEthernet0/3
> switchport access vlan 3
>!
>interface FastEthernet0/4
> switchport access vlan 4
>!
> !
>interface FastEthernet0/10
> switchport access vlan 10
>!
> 
>interface FastEthernet0/20
> switchport access vlan 10
>!
>interface FastEthernet0/21
>!
>interface FastEthernet0/22
>!
>interface FastEthernet0/23
> switchport trunk encapsulation dot1q
>!
>interface FastEthernet0/24
>!
>interface GigabitEthernet0/1
>!
>interface GigabitEthernet0/2
>!
>interface Vlan1
> no ip address
> shutdown
>!
>interface Vlan2
> ip address 192.168.2.2 255.255.255.0
>!
>interface Vlan3
> ip address 192.168.3.2 255.255.255.0
>!
>interface Vlan4
> ip address 192.168.4.2 255.255.255.0
>!
>interface Vlan10
> ip address 192.168.10.2 255.255.255.0
>!
>ip classless
> !
>line con 0
>line vty 0 4
> login
>!
>end
>
>
>
>
>With Regards
>Waheed Ahmed
>_______________________________________________
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>
>http://onlinestudylist.com/mailman/listinfo/ccie_rs
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to