The file is not compatible with my version of packet tracer. Use 5.2 and 5.3.2. What version do you use?
>From what you describe you have a simple sketch like below. VLAN 2 (192.168.2.2) --------- SW1------trunk link-------- SW2 --------- VLAN 2 (192.168.2.3) This should work without issues in the first place. If you are on skype unicast me your skype id. Sent from my iPhone On Dec 17, 2012, at 18:42, waheed Ahmed <[email protected]> wrote: > > Yes ping is not working... Packet tracer file is attached herewith ........ > for reference please. > > > > > > > With Regards > Waheed Ahmed > +971-55-7720310 > > From: Oshin Sanjo <[email protected]> > To: waheed Ahmed <[email protected]> > Cc: "[email protected]" <[email protected]> > Sent: Monday, December 17, 2012 9:24 PM > Subject: Re: [OSL | CCIE_RS] Fw: VLAN routing on MLS > > So now what are you trying to reach that your pings are failing??? > > Sent from my iPhone > > On Dec 17, 2012, at 18:21, waheed Ahmed <[email protected]> wrote: > >> Thanks Oshin, >> >> Switch#show ip route >> Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP >> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area >> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 >> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP >> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter >> area >> * - candidate default, U - per-user static route, o - ODR >> P - periodic downloaded static route >> >> Gateway of last resort is not set >> >> C 192.168.2.0/24 is directly connected, Vlan2 >> C 192.168.3.0/24 is directly connected, Vlan3 >> C 192.168.4.0/24 is directly connected, Vlan4 >> C 192.168.10.0/24 is directly connected, Vlan10 >> >> >> Switch#show ip interface brief >> Interface IP-Address OK? Method Status >> Protocol >> >> FastEthernet0/1 unassigned YES NVRAM down down >> >> FastEthernet0/2 unassigned YES NVRAM up up >> >> FastEthernet0/3 unassigned YES NVRAM up up >> >> FastEthernet0/4 unassigned YES NVRAM up up >> >> FastEthernet0/10 unassigned YES NVRAM up up >> >> FastEthernet0/20 unassigned YES NVRAM up up >> >> FastEthernet0/21 unassigned YES NVRAM down down >> >> FastEthernet0/22 unassigned YES NVRAM down down >> >> FastEthernet0/23 unassigned YES NVRAM up up >> >> FastEthernet0/24 unassigned YES NVRAM down down >> >> GigabitEthernet0/1 unassigned YES NVRAM down down >> >> GigabitEthernet0/2 unassigned YES NVRAM down down >> >> Vlan1 unassigned YES NVRAM up up >> >> Vlan2 192.168.2.2 YES manual up up >> >> Vlan3 192.168.3.2 YES manual up up >> >> Vlan4 192.168.4.2 YES manual up up >> >> Vlan10 192.168.10.2 YES manual up up >> Switch# >> >> >> >> >> >> >> >> With Regards >> Waheed Ahmed >> +971-55-7720310 >> >> From: Oshin Sanjo <[email protected]> >> To: waheed Ahmed <[email protected]> >> Cc: "[email protected]" <[email protected]> >> Sent: Monday, December 17, 2012 9:02 PM >> Subject: Re: [OSL | CCIE_RS] Fw: VLAN routing on MLS >> >> What i mean is. >> >> Input the command "sh ip route". I want to see the output. >> >> Also, what are the status of the vlan interfaces?? That is vlan 2,3,4 and >> 10. You can do a "sh ip int bri" >> >> We can work through together. >> >> Sent from my iPhone >> >> On Dec 17, 2012, at 17:47, waheed Ahmed <[email protected]> wrote: >> >> > IP routing is enabled on both MLS and trunk links shown working on both >> > sides. >> > >> > >> > >> > Switch#show interfaces trunk >> > Port Mode Encapsulation Status Native vlan >> > Fa0/23 on 802.1q >> > trunking 1 >> > >> > Port Vlans allowed on trunk >> > Fa0/23 1-1005 >> > >> > Port Vlans allowed and active in management domain >> > Fa0/23 1,2,3,4,10 >> > >> > Port Vlans in spanning tree forwarding state and not pruned >> > Fa0/23 none >> > Switch# >> > >> > >> > Switch# show spanning-tree summary >> > Switch is in pvst mode >> > Root bridge for: default Accounts Sales Managemetn HR >> > Extended system ID is enabled >> > Portfast >> > Default is disabled >> > PortFast BPDU Guard Default is disabled >> > Portfast BPDU Filter Default is disabled >> > Loopguard Default is disabled >> > EtherChannel misconfig guard is disabled >> > UplinkFast is disabled >> > BackboneFast is disabled >> > Configured Pathcost method used is short >> > >> > Name Blocking Listening Learning Forwarding STP Active >> > ---------------------- -------- --------- -------- ---------- >> > ---------- >> > VLAN0001 0 0 0 2 2 >> > VLAN0002 0 0 0 1 1 >> > VLAN0003 0 0 >> > 0 1 1 >> > VLAN0004 0 0 0 1 1 >> > VLAN0010 0 0 0 1 1 >> > >> > ---------------------- -------- --------- -------- ---------- ---------- >> > 5 >> > vlans 0 0 0 6 6 >> > >> > >> > With Regards >> > Waheed Ahmed >> > +971-55-7720310 >> > >> > >> > ________________________________ >> > From: ankit thakrar <[email protected]> >> > To: waheed Ahmed <[email protected]> >> > Cc: "[email protected]" <[email protected]> >> > Sent: Monday, December 17, 2012 8:19 PM >> > Subject: Re: [OSL | CCIE_RS] VLAN routing on MLS >> > >> > >> > Dear Ahmed, >> > >> > Have you enable ip routing on both the switches to have layer 3 routing >> > working. >> > >> > >> > Regards, >> > Ankit >> > >> > >> > On Mon, Dec 17, 2012 at 9:18 PM, waheed Ahmed <[email protected]> >> > wrote: >> > >> > >> >> >> >> Dear Team , >> >> >> >> >> >> I am facing problem that i want to configure routing between two 3560 >> >> Switches as given topology . But it is not working still and >> >> configuration of Switches are mentioned below . Waiting for some >> >> corrections in my configuration . >> >> >> >> >> >> Switch#show running-config >> >> Building configuration... >> >> >> >> Current configuration : 1436 bytes >> >> ! >> >> version 12.2 >> >> no service timestamps log datetime msec >> >> no service timestamps debug datetime msec >> >> no service password-encryption >> >> ! >> >> hostname Switch1 >> >> ! >> >> ip routing >> >> ! >> >> spanning-tree mode pvst >> >> ! >> >> interface FastEthernet0/1 >> >> ! >> >> interface FastEthernet0/2 >> >> switchport access vlan 2 >> >> ! >> >> interface FastEthernet0/3 >> >> switchport access vlan 3 >> >> ! >> >> interface FastEthernet0/4 >> >> switchport access vlan 4 >> >> ! >> >> interface FastEthernet0/9 >> >> ! >> >> interface FastEthernet0/10 >> >> switchport access vlan 10 >> >> ! >> >> interface FastEthernet0/23 >> >> switchport trunk encapsulation dot1q >> >> ! >> >> interface GigabitEthernet0/2 >> >> ! >> >> interface Vlan1 >> >> no ip address >> >> shutdown >> >> ! >> >> interface Vlan2 >> >> ip address 192.168.2.3 255.255.255.0 >> >> ! >> >> interface Vlan3 >> >> ip address 192.168.3.3 255.255.255.0 >> >> ! >> >> interface Vlan4 >> >> ip address 192.168.4.3 255.255.255.0 >> >> ! >> >> interface Vlan10 >> >> ip address 192.168.10.3 255.255.255.0 >> >> ! >> >> ip classless >> >> ! >> >> ! >> >> ! >> >> line con 0 >> >> line vty 0 4 >> >> login >> >> ! >> >> ! >> >> ! >> >> end >> >> >> >> >> >> Switch# >> >> >> >> >> >> =================================== >> >> >> >> Switch#show run >> >> Building configuration... >> >> >> >> ! >> >> hostname Switch0 >> >> ! >> >> >> >> ip routing >> >> ! >> >> spanning-tree mode pvst >> >> ! >> >> ! >> >> interface FastEthernet0/1 >> >> ! >> >> interface FastEthernet0/2 >> >> switchport access vlan 2 >> >> ! >> >> interface FastEthernet0/3 >> >> switchport access vlan 3 >> >> ! >> >> interface FastEthernet0/4 >> >> switchport access vlan 4 >> >> ! >> >> ! >> >> interface FastEthernet0/10 >> >> switchport access vlan 10 >> >> ! >> >> >> >> interface FastEthernet0/20 >> >> switchport access vlan 10 >> >> ! >> >> interface FastEthernet0/21 >> >> ! >> >> interface FastEthernet0/22 >> >> ! >> >> interface FastEthernet0/23 >> >> switchport trunk encapsulation dot1q >> >> ! >> >> interface FastEthernet0/24 >> >> ! >> >> interface GigabitEthernet0/1 >> >> ! >> >> interface GigabitEthernet0/2 >> >> ! >> >> interface Vlan1 >> >> no ip address >> >> shutdown >> >> ! >> >> interface Vlan2 >> >> ip address 192.168.2.2 255.255.255.0 >> >> ! >> >> interface Vlan3 >> >> ip address 192.168.3.2 255.255.255.0 >> >> ! >> >> interface Vlan4 >> >> ip address 192.168.4.2 255.255.255.0 >> >> ! >> >> interface Vlan10 >> >> ip address 192.168.10.2 255.255.255.0 >> >> ! >> >> ip classless >> >> ! >> >> line con 0 >> >> line vty 0 4 >> >> login >> >> ! >> >> end >> >> >> >> >> >> >> >> >> >> With Regards >> >> Waheed Ahmed >> >> _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, please >> >> visit www.ipexpert.com >> >> >> >> Are you a CCNP or CCIE and looking for a job? Check out >> >> www.PlatinumPlacement.com >> >> >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> >> >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> > http://onlinestudylist.com/mailman/listinfo/ccie_rs >> >> > > > <MLS SVI.pkt> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
