What i mean is. Input the command "sh ip route". I want to see the output.
Also, what are the status of the vlan interfaces?? That is vlan 2,3,4 and 10. You can do a "sh ip int bri" We can work through together. Sent from my iPhone On Dec 17, 2012, at 17:47, waheed Ahmed <[email protected]> wrote: > IP routing is enabled on both MLS and trunk links shown working on both sides. > > > > Switch#show interfaces trunk > Port Mode Encapsulation Status Native vlan > Fa0/23 on 802.1q > trunking 1 > > Port Vlans allowed on trunk > Fa0/23 1-1005 > > Port Vlans allowed and active in management domain > Fa0/23 1,2,3,4,10 > > Port Vlans in spanning tree forwarding state and not pruned > Fa0/23 none > Switch# > > > Switch# show spanning-tree summary > Switch is in pvst mode > Root bridge for: default Accounts Sales Managemetn HR > Extended system ID is enabled > Portfast > Default is disabled > PortFast BPDU Guard Default is disabled > Portfast BPDU Filter Default is disabled > Loopguard Default is disabled > EtherChannel misconfig guard is disabled > UplinkFast is disabled > BackboneFast is disabled > Configured Pathcost method used is short > > Name Blocking Listening Learning Forwarding STP Active > ---------------------- -------- --------- -------- ---------- > ---------- > VLAN0001 0 0 0 2 2 > VLAN0002 0 0 0 1 1 > VLAN0003 0 0 > 0 1 1 > VLAN0004 0 0 0 1 1 > VLAN0010 0 0 0 1 1 > > ---------------------- -------- --------- -------- ---------- ---------- > 5 > vlans 0 0 0 6 6 > > > With Regards > Waheed Ahmed > +971-55-7720310 > > > ________________________________ > From: ankit thakrar <[email protected]> > To: waheed Ahmed <[email protected]> > Cc: "[email protected]" <[email protected]> > Sent: Monday, December 17, 2012 8:19 PM > Subject: Re: [OSL | CCIE_RS] VLAN routing on MLS > > > Dear Ahmed, > > Have you enable ip routing on both the switches to have layer 3 routing > working. > > > Regards, > Ankit > > > On Mon, Dec 17, 2012 at 9:18 PM, waheed Ahmed <[email protected]> wrote: > > >> >> Dear Team , >> >> >> I am facing problem that i want to configure routing between two 3560 >> Switches as given topology . But it is not working still and configuration >> of Switches are mentioned below . Waiting for some corrections in my >> configuration . >> >> >> Switch#show running-config >> Building configuration... >> >> Current configuration : 1436 bytes >> ! >> version 12.2 >> no service timestamps log datetime msec >> no service timestamps debug datetime msec >> no service password-encryption >> ! >> hostname Switch1 >> ! >> ip routing >> ! >> spanning-tree mode pvst >> ! >> interface FastEthernet0/1 >> ! >> interface FastEthernet0/2 >> switchport access vlan 2 >> ! >> interface FastEthernet0/3 >> switchport access vlan 3 >> ! >> interface FastEthernet0/4 >> switchport access vlan 4 >> ! >> interface FastEthernet0/9 >> ! >> interface FastEthernet0/10 >> switchport access vlan 10 >> ! >> interface FastEthernet0/23 >> switchport trunk encapsulation dot1q >> ! >> interface GigabitEthernet0/2 >> ! >> interface Vlan1 >> no ip address >> shutdown >> ! >> interface Vlan2 >> ip address 192.168.2.3 255.255.255.0 >> ! >> interface Vlan3 >> ip address 192.168.3.3 255.255.255.0 >> ! >> interface Vlan4 >> ip address 192.168.4.3 255.255.255.0 >> ! >> interface Vlan10 >> ip address 192.168.10.3 255.255.255.0 >> ! >> ip classless >> ! >> ! >> ! >> line con 0 >> line vty 0 4 >> login >> ! >> ! >> ! >> end >> >> >> Switch# >> >> >> =================================== >> >> Switch#show run >> Building configuration... >> >> ! >> hostname Switch0 >> ! >> >> ip routing >> ! >> spanning-tree mode pvst >> ! >> ! >> interface FastEthernet0/1 >> ! >> interface FastEthernet0/2 >> switchport access vlan 2 >> ! >> interface FastEthernet0/3 >> switchport access vlan 3 >> ! >> interface FastEthernet0/4 >> switchport access vlan 4 >> ! >> ! >> interface FastEthernet0/10 >> switchport access vlan 10 >> ! >> >> interface FastEthernet0/20 >> switchport access vlan 10 >> ! >> interface FastEthernet0/21 >> ! >> interface FastEthernet0/22 >> ! >> interface FastEthernet0/23 >> switchport trunk encapsulation dot1q >> ! >> interface FastEthernet0/24 >> ! >> interface GigabitEthernet0/1 >> ! >> interface GigabitEthernet0/2 >> ! >> interface Vlan1 >> no ip address >> shutdown >> ! >> interface Vlan2 >> ip address 192.168.2.2 255.255.255.0 >> ! >> interface Vlan3 >> ip address 192.168.3.2 255.255.255.0 >> ! >> interface Vlan4 >> ip address 192.168.4.2 255.255.255.0 >> ! >> interface Vlan10 >> ip address 192.168.10.2 255.255.255.0 >> ! >> ip classless >> ! >> line con 0 >> line vty 0 4 >> login >> ! >> end >> >> >> >> >> With Regards >> Waheed Ahmed >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
