Waheed, This is primarily a CCIE study list, where we discuss issues regarding CCIE R&S studies. Most of us don't use/have access to packet tracer. Please try again using the real equipment and we can take it from there :-)
-- Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor - IPexpert On Mon, Dec 17, 2012 at 9:42 AM, waheed Ahmed <[email protected]> wrote: > > > Yes ping is not working... Packet tracer file is attached herewith ........ > for reference please. > > > > > > > > With Regards > Waheed Ahmed > +971-55-7720310 > > > ________________________________ > From: Oshin Sanjo <[email protected]> > To: waheed Ahmed <[email protected]> > Cc: "[email protected]" <[email protected]> > Sent: Monday, December 17, 2012 9:24 PM > Subject: Re: [OSL | CCIE_RS] Fw: VLAN routing on MLS > > > So now what are you trying to reach that your pings are failing??? > > Sent from my iPhone > > On Dec 17, 2012, at 18:21, waheed Ahmed <[email protected]> wrote: > > > Thanks Oshin, >> >>Switch#show ip route >>Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP >> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area >> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 >> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP >> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter >> area >> * - candidate default, U - per-user static route, o - ODR >> P - periodic downloaded static route >> >>Gateway of last resort is not set >> >>C 192.168.2.0/24 is directly connected, Vlan2 >>C > 192.168.3.0/24 is directly connected, Vlan3 >>C 192.168.4.0/24 is directly connected, Vlan4 >>C 192.168.10.0/24 is directly connected, Vlan10 >> >> >>Switch#show ip interface brief >>Interface IP-Address OK? Method Status >>Protocol >> >>FastEthernet0/1 unassigned YES NVRAM down down >> >>FastEthernet0/2 unassigned YES NVRAM up > up >> >>FastEthernet0/3 unassigned YES NVRAM up up >> >>FastEthernet0/4 unassigned YES NVRAM up up >> >>FastEthernet0/10 unassigned YES NVRAM up up >> >>FastEthernet0/20 unassigned YES NVRAM > up up >> >>FastEthernet0/21 unassigned YES NVRAM down down >> >>FastEthernet0/22 unassigned YES NVRAM down down >> >>FastEthernet0/23 unassigned YES NVRAM up up >> >>FastEthernet0/24 unassigned YES NVRAM > down down >> >>GigabitEthernet0/1 unassigned YES NVRAM down down >> >>GigabitEthernet0/2 unassigned YES NVRAM down down >> >>Vlan1 unassigned YES NVRAM up > up >> >>Vlan2 192.168.2.2 YES manual up up >> >>Vlan3 192.168.3.2 YES manual up up >> >>Vlan4 192.168.4.2 YES manual up > up >> >>Vlan10 192.168.10.2 YES manual up up >>Switch# >> >> >> >> >> >> >> >> >> >> >>With Regards >>Waheed Ahmed >>+971-55-7720310 >> >> >> >>________________________________ >> From: Oshin Sanjo <[email protected]> >>To: waheed Ahmed <[email protected]> >>Cc: "[email protected]" <[email protected]> >>Sent: Monday, December 17, 2012 9:02 PM >>Subject: Re: [OSL | CCIE_RS] Fw: VLAN routing on MLS >> >>What i mean is. >> >>Input the command "sh ip route". I want to see the output. >> >>Also, what are the status of the vlan interfaces?? That is vlan 2,3,4 and 10. >>You can do a "sh ip int bri" >> >>We can work through together. >> >>Sent from my iPhone >> >>On Dec 17, 2012, at 17:47, waheed Ahmed <[email protected]> wrote: >> >>> IP routing is enabled on both MLS and trunk links shown working on both >>> sides. >>> >>> >>> >>> Switch#show interfaces trunk >>> Port Mode Encapsulation Status Native vlan >>> Fa0/23 on 802.1q >>> trunking 1 >>> >>> Port Vlans allowed on trunk >>> > Fa0/23 1-1005 >>> >>> Port Vlans allowed and active in management domain >>> Fa0/23 1,2,3,4,10 >>> >>> Port Vlans in spanning tree forwarding state and not pruned >>> Fa0/23 none >>> Switch# >>> >>> >>> Switch# show spanning-tree summary >>> Switch is in pvst mode >>> Root bridge for: default Accounts Sales Managemetn HR >>> Extended system ID is enabled >>> Portfast >>> Default is disabled >>> PortFast BPDU Guard Default is disabled >>> Portfast BPDU Filter Default is disabled >>> Loopguard Default is disabled >>> EtherChannel misconfig guard is disabled >>> UplinkFast > is disabled >>> BackboneFast is disabled >>> Configured Pathcost method used is short >>> >>> Name Blocking Listening Learning Forwarding STP Active >>> ---------------------- -------- --------- -------- ---------- >>> ---------- >>> VLAN0001 0 0 0 2 2 >>> VLAN0002 0 0 0 1 1 >>> VLAN0003 0 0 >>> 0 1 1 >>> VLAN0004 0 0 0 1 1 >>> VLAN0010 0 0 0 1 1 >>> >>> ---------------------- -------- --------- -------- ---------- ---------- >>> 5 >>> vlans 0 0 0 6 6 >>> >>> >>> With Regards >>> Waheed Ahmed >>> +971-55-7720310 >>> >>> >>> > ________________________________ >>> From: ankit thakrar <[email protected]> >>> To: waheed Ahmed <[email protected]> >>> Cc: "[email protected]" <[email protected]> >>> Sent: Monday, December 17, 2012 8:19 PM >>> Subject: Re: [OSL | CCIE_RS] VLAN routing on MLS >>> >>> >>> Dear Ahmed, >>> >>> Have you enable ip routing on both the switches to have layer 3 routing >>> working. >>> >>> >>> Regards, >>> Ankit >>> >>> >>> On Mon, Dec 17, 2012 at 9:18 PM, waheed Ahmed <[email protected]> >>> wrote: >>> >>> >>>> >>>> Dear Team , >>>> >>>> >>>> I am facing problem that i want to configure routing between two 3560 >>>> Switches as given topology . But it is not working still and configuration >>>> of Switches are mentioned below . Waiting for some corrections in my >>>> configuration . >>>> >>>> >>>> Switch#show running-config >>>> Building configuration... >>>> >>>> Current configuration : 1436 bytes >>>> ! >>>> version 12.2 >>>> no service timestamps log datetime msec >>>> no service timestamps debug datetime msec >>>> no service password-encryption >>>> ! >>>> hostname Switch1 >>>> ! >>>> ip routing >>>> ! >>>> spanning-tree mode pvst >>>> ! >>>> interface > FastEthernet0/1 >>>> ! >>>> interface FastEthernet0/2 >>>> switchport access vlan 2 >>>> ! >>>> interface FastEthernet0/3 >>>> switchport access vlan 3 >>>> ! >>>> interface FastEthernet0/4 >>>> switchport access vlan 4 >>>> ! >>>> interface FastEthernet0/9 >>>> ! >>>> interface FastEthernet0/10 >>>> switchport access vlan 10 >>>> ! >>>> interface FastEthernet0/23 >>>> switchport trunk encapsulation dot1q >>>> ! >>>> interface GigabitEthernet0/2 >>>> ! >>>> interface Vlan1 >>>> no ip address >>>> shutdown >>>> ! >>>> interface Vlan2 >>>> ip address 192.168.2.3 255.255.255.0 >>>> ! >>>> interface Vlan3 >>>> ip address 192.168.3.3 255.255.255.0 >>>> ! >>>> interface > Vlan4 >>>> ip address 192.168.4.3 255.255.255.0 >>>> ! >>>> interface Vlan10 >>>> ip address 192.168.10.3 255.255.255.0 >>>> ! >>>> ip classless >>>> ! >>>> ! >>>> ! >>>> line con 0 >>>> line vty 0 4 >>>> login >>>> ! >>>> ! >>>> ! >>>> end >>>> >>>> >>>> Switch# >>>> >>>> >>>> =================================== >>>> >>>> Switch#show run >>>> Building configuration... >>>> >>>> ! >>>> hostname Switch0 >>>> ! >>>> >>>> ip routing >>>> ! >>>> spanning-tree mode pvst >>>> ! >>>> ! >>>> interface FastEthernet0/1 >>>> ! >>>> interface FastEthernet0/2 >>>> switchport access vlan 2 >>>> ! >>>> interface > FastEthernet0/3 >>>> switchport access vlan 3 >>>> ! >>>> interface FastEthernet0/4 >>>> switchport access vlan 4 >>>> ! >>>> ! >>>> interface FastEthernet0/10 >>>> switchport access vlan 10 >>>> ! >>>> >>>> interface FastEthernet0/20 >>>> switchport access vlan 10 >>>> ! >>>> interface FastEthernet0/21 >>>> ! >>>> interface FastEthernet0/22 >>>> ! >>>> interface FastEthernet0/23 >>>> switchport trunk encapsulation dot1q >>>> ! >>>> interface FastEthernet0/24 >>>> ! >>>> interface GigabitEthernet0/1 >>>> ! >>>> interface GigabitEthernet0/2 >>>> ! >>>> interface Vlan1 >>>> no ip address >>>> shutdown >>>> ! >>>> interface Vlan2 >>>> ip address 192.168.2.2 > 255.255.255.0 >>>> ! >>>> interface Vlan3 >>>> ip address 192.168.3.2 255.255.255.0 >>>> ! >>>> interface Vlan4 >>>> ip address 192.168.4.2 255.255.255.0 >>>> ! >>>> interface Vlan10 >>>> ip address 192.168.10.2 255.255.255.0 >>>> ! >>>> ip classless >>>> ! >>>> line con 0 >>>> line vty 0 4 >>>> login >>>> ! >>>> end >>>> >>>> >>>> >>>> >>>> With Regards >>>> Waheed Ahmed >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, please >>>> visit www.ipexpert.com >>>> >>>> Are you a CCNP or CCIE and looking for a job? Check out >>>> www.PlatinumPlacement.com >>>> >>>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >>>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >>> >>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> >> >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
