HI Otto, So in which scenario I will be using 239.1.1.3:16384 on SiteB router please ?
Thanks // AK On Tue, Jan 26, 2010 at 12:22 PM, Otto Sanchez <o...@ipexpert.com> wrote: > Hi, > > The branch router will always multicast moh in g.711 format from the flash. > So, branch phones should be configured to hear the 239.1.1.1 port 16384 and > not 239.1.1.3:16384 and codec g.729 (this is a not supported > configuration) when they are put on hold. > > How do you guarantee your branch phones will "tune" 239.1.1.1:16384 in > g.711 format and still be able to communicate with other sites using g.729?. > Well that's when the g.711 region/DP show up, configure a region such as the > codec relationship with any other region is g.711, assign this region to a > new DP and then assign that DP to the MOH server configured for the siteB DP > MRGL->MRG, > > I still trying to find a reason why you will need to stream g.729 from the > router flash in this scenario, you might want to do that if the moh > streaming is coming from the hq site, > > There's a very good document about this feature, I reference it just in > case you haven't take a look at it, > > > http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cusrst/admin/srst/configuration/guide/srs_moh.html > > HTH, > > > On Mon, Jan 25, 2010 at 8:03 PM, vccie2010 <vccie2...@gmail.com> wrote: > >> Thanks Otto for yoru kind reponse, so let me put the question otherway , >> what should I do on the UCM and SiteB router if I was to use MOH from flash >> and it shd be G729. Is this scenario possible please as we say on SiteB >> router the IP address will be 239.1.1.3 and I think in this case all the >> configs on UCM remain same, right pls? >> >> 2010/1/25 Otto Sanchez <o...@ipexpert.com> >> >> Hi, >>> >>> The only format supported by the moh file is g.711, you should also take >>> care of the multicast ip address numbering to make it match to a g.711 moh >>> streaming not g.729, >>> >>> BR, >>> >>> ,2010/1/22 Roger Källberg <roger.kallb...@cygate.se> >>> >>> As far as I know you need to have the file(s) in the correct format in >>>> flash, ie G729 if you want to use that for your MOH or G711U if that's what >>>> you want. Vik please correct me if I'm wrong. >>>> >>>> Brgds, >>>> *Roger Källberg* >>>> Consultant >>>> Cygate AB >>>> ------------------------------ >>>> *Från:* vccie2010 [vccie2...@gmail.com] >>>> *Skickat:* den 22 januari 2010 04:18 >>>> *Till:* Vik Malhi >>>> *Kopia:* OSL Group >>>> *Ämne:* Re: [OSL | CCIE_Voice] MOH from Flash >>>> >>>> Also Vik, is it must to have MOH flash file in G729 format if I need >>>> to have G729 MOH from flash ??? I am confused here...Could you please help >>>> me here. >>>> >>>> On Wed, Jan 20, 2010 at 9:41 PM, vccie2010 <vccie2...@gmail.com> wrote: >>>> >>>>> I was trying to test MOH from flash on BR1. G711 MOH works fine butI am >>>>> having problem when trying config and test G729. >>>>> >>>>> You said "There should be no reason why you can’t play a g729 file >>>>> from the flash if you have a music file in that format on the flash" >>>>> ......so does it mean I need to have MOH file shd be in G729 format so >>>>> that >>>>> the MOH from flash is G729 MOH, right ? >>>>> >>>>> >>>>> >>>>> On Wed, Jan 20, 2010 at 8:51 PM, Vik Malhi <vma...@ipexpert.com>wrote: >>>>> >>>>>> I’m not fully understanding the scenario. When you press hold from a >>>>>> PSTN phone then you are not testing your MOH settings. Can you confirm? >>>>>> >>>>>> When you are sourcing from the BR1 flash I would guess you would >>>>>> ALWAYS want it to be g711 since it is now local to the BR1 site. That’s >>>>>> one >>>>>> of the main reasons for doing this- we can play g711 music without any >>>>>> bandwidth being tied up. >>>>>> >>>>>> There should be no reason why you can’t play a g729 file from the >>>>>> flash if you have a music file in that format on the flash and you use >>>>>> the >>>>>> "multicast moh 239.1.1.3 port 16384 route <favoicesubinterface IP Add> >>>>>> <lo0 >>>>>> IP Addr> " command and increment on ip address on the UCM, use a single >>>>>> server (the one which has the base multicast ip of 239.1.1.1) and audio >>>>>> source 1. >>>>>> >>>>>> -- >>>>>> Vik Malhi – CCIE #13890 >>>>>> Instructor - IPexpert, Inc. >>>>>> Mailto: *vma...@ipexpert.com >>>>>> *Telephone: +1.810.326.1444 >>>>>> Fax: +1.810.454.0130 >>>>>> Live Assistance, Please visit: www.ipexpert.com/chat <* >>>>>> http://www.ipexpert.com/chat*> >>>>>> >>>>>> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA >>>>>> (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security >>>>>> & >>>>>> Service Provider) Certification Training with locations throughout the >>>>>> United States, Europe and Australia. Be sure to check out our online >>>>>> communities at www.ipexpert.com/communities <* >>>>>> http://www.ipexpert.com/communities*> and our public website at >>>>>> www.ipexpert.com <*http://www.ipexpert.com*> . >>>>>> >>>>>> >>>>>> ------------------------------ >>>>>> *From: *vccie2010 <vccie2...@gmail.com> >>>>>> *Date: *Wed, 20 Jan 2010 20:22:50 -0800 >>>>>> >>>>>> *To: *OSL Group <ccie_voice@onlinestudylist.com> >>>>>> *Subject: *Re: [OSL | CCIE_Voice] MOH from Flash >>>>>> >>>>>> Vik, so you mean whether we want G729 MOH or G711MOH to be played on >>>>>> BR1 from flash we should ALWAYS place MOH server in G711only. I did that >>>>>> and >>>>>> with that G711 MOH works perfectly fine when I put either HQ phone or >>>>>> PSTN >>>>>> phone on hold. >>>>>> >>>>>> But I am having problem work G729 MOH heard on BR1 phone when I place >>>>>> it on hold from HQ phone ( there is dead silence).... while G729 MOH from >>>>>> works fine when I place BR1 phone on hold from PSTN ( I hear G729 Music >>>>>> on >>>>>> BR1 phone) . A this time on BR1 GW I do have "multicast moh 239.1.1.3 >>>>>> port >>>>>> 16384 route <favoicesubinterface IP Add> <lo0 IP Addr> " >>>>>> >>>>>> Am I missing something here please ? >>>>>> >>>>>> Wed, Jan 20, 2010 at 2:59 PM, vccie2010 <vccie2...@gmail.com> wrote: >>>>>> >>>>>> correction please... >>>>>> >>>>>> But when I change the DP on MOH server as "HQ-DP" I get G729 MOH only >>>>>> when PSTN caller is put on hold but dead silence again when placing HQ >>>>>> phone >>>>>> on hold. Is it normal behaviour or am I missing somehting here please >>>>>> >>>>>> "HQ-DP" has region which is g711 internaly and g729 to br1 and br2 >>>>>> regions... >>>>>> >>>>>> On Wed, Jan 20, 2010 at 2:48 PM, vccie2010 <vccie2...@gmail.com> >>>>>> wrote: >>>>>> >>>>>> When I set the MOH server in G711only ( which has region with G711only >>>>>> to all other regions) and MOH Aduio source set to MC and MOH server set >>>>>> to >>>>>> 239.1.1.1 port 16384 with max hops 1 >>>>>> >>>>>> call-manager-fallback >>>>>> ip source-addr <favoicesubinterface IP Addr> >>>>>> max-eph 1 >>>>>> max-dn 1 >>>>>> multicast moh 239.1.1.1 port 16384 route <favoicesubinterface IP Add> >>>>>> <lo0 IP Addr> >>>>>> >>>>>> ccm-manager music-oh-hold.au >>>>>> >>>>>> With above config G711 MOH from flash works fine, >>>>>> >>>>>> but when I try to set the G729 MOH by changing " multicast moh >>>>>> 239.1.1.3 port 16384 route <favoicesubinterface IP Add> <lo0 IP Addr> >>>>>> get silence MOH when I call from HQ internally or from PSTN . But when >>>>>> I change the DP on MOH server I get G729 MOH only when PSTN caller is >>>>>> put on >>>>>> hold but dead silence again when placing HQ phone on hold. Is it normal >>>>>> behaviour or am I missing somehting here please ? >>>>>> >>>>>> Thanks for your help. >>>>>> >>>>>> -AK >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> ------------------------------ >>>>>> _______________________________________________ >>>>>> For more information regarding industry leading CCIE Lab training, >>>>>> please visit www.ipexpert.com >>>>>> >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >>>> please visit www.ipexpert.com >>>> >>>> >>> >>> >>> -- >>> Regards, >>> >>> Otto Sanchez >>> CCIE #25592 (Voice) >>> Support Engineer - IPexpert, Inc. >>> URL: http://www.IPexpert.com <http://www.ipexpert.com/> >>> >> >> > > > -- > Regards, > > Otto Sanchez > CCIE #25592 (Voice) > Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com