As far as I know you need to have the file(s) in the correct format in flash, ie G729 if you want to use that for your MOH or G711U if that's what you want. Vik please correct me if I'm wrong.
Brgds, Roger Källberg Consultant Cygate AB ________________________________ Från: vccie2010 [vccie2...@gmail.com] Skickat: den 22 januari 2010 04:18 Till: Vik Malhi Kopia: OSL Group Ämne: Re: [OSL | CCIE_Voice] MOH from Flash Also Vik, is it must to have MOH flash file in G729 format if I need to have G729 MOH from flash ??? I am confused here...Could you please help me here. On Wed, Jan 20, 2010 at 9:41 PM, vccie2010 <vccie2...@gmail.com<mailto:vccie2...@gmail.com>> wrote: I was trying to test MOH from flash on BR1. G711 MOH works fine butI am having problem when trying config and test G729. You said "There should be no reason why you can’t play a g729 file from the flash if you have a music file in that format on the flash" ......so does it mean I need to have MOH file shd be in G729 format so that the MOH from flash is G729 MOH, right ? On Wed, Jan 20, 2010 at 8:51 PM, Vik Malhi <vma...@ipexpert.com<mailto:vma...@ipexpert.com>> wrote: I’m not fully understanding the scenario. When you press hold from a PSTN phone then you are not testing your MOH settings. Can you confirm? When you are sourcing from the BR1 flash I would guess you would ALWAYS want it to be g711 since it is now local to the BR1 site. That’s one of the main reasons for doing this- we can play g711 music without any bandwidth being tied up. There should be no reason why you can’t play a g729 file from the flash if you have a music file in that format on the flash and you use the "multicast moh 239.1.1.3 port 16384 route <favoicesubinterface IP Add> <lo0 IP Addr> " command and increment on ip address on the UCM, use a single server (the one which has the base multicast ip of 239.1.1.1) and audio source 1. -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com<http://vma...@ipexpert.com> Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat<http://www.ipexpert.com/chat> <http://www.ipexpert.com/chat> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities<http://www.ipexpert.com/communities> <http://www.ipexpert.com/communities> and our public website at www.ipexpert.com<http://www.ipexpert.com/> <http://www.ipexpert.com<http://www.ipexpert.com/>> . ________________________________ From: vccie2010 <vccie2...@gmail.com<http://vccie2...@gmail.com>> Date: Wed, 20 Jan 2010 20:22:50 -0800 To: OSL Group <ccie_voice@onlinestudylist.com<http://ccie_voice@onlinestudylist.com>> Subject: Re: [OSL | CCIE_Voice] MOH from Flash Vik, so you mean whether we want G729 MOH or G711MOH to be played on BR1 from flash we should ALWAYS place MOH server in G711only. I did that and with that G711 MOH works perfectly fine when I put either HQ phone or PSTN phone on hold. But I am having problem work G729 MOH heard on BR1 phone when I place it on hold from HQ phone ( there is dead silence).... while G729 MOH from works fine when I place BR1 phone on hold from PSTN ( I hear G729 Music on BR1 phone) . A this time on BR1 GW I do have "multicast moh 239.1.1.3 port 16384 route <favoicesubinterface IP Add> <lo0 IP Addr> " Am I missing something here please ? Wed, Jan 20, 2010 at 2:59 PM, vccie2010 <vccie2...@gmail.com<http://vccie2...@gmail.com>> wrote: correction please... But when I change the DP on MOH server as "HQ-DP" I get G729 MOH only when PSTN caller is put on hold but dead silence again when placing HQ phone on hold. Is it normal behaviour or am I missing somehting here please "HQ-DP" has region which is g711 internaly and g729 to br1 and br2 regions... On Wed, Jan 20, 2010 at 2:48 PM, vccie2010 <vccie2...@gmail.com<http://vccie2...@gmail.com>> wrote: When I set the MOH server in G711only ( which has region with G711only to all other regions) and MOH Aduio source set to MC and MOH server set to 239.1.1.1 port 16384 with max hops 1 call-manager-fallback ip source-addr <favoicesubinterface IP Addr> max-eph 1 max-dn 1 multicast moh 239.1.1.1 port 16384 route <favoicesubinterface IP Add> <lo0 IP Addr> ccm-manager music-oh-hold.au With above config G711 MOH from flash works fine, but when I try to set the G729 MOH by changing " multicast moh 239.1.1.3 port 16384 route <favoicesubinterface IP Add> <lo0 IP Addr> get silence MOH when I call from HQ internally or from PSTN . But when I change the DP on MOH server I get G729 MOH only when PSTN caller is put on hold but dead silence again when placing HQ phone on hold. Is it normal behaviour or am I missing somehting here please ? Thanks for your help. -AK ________________________________ _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com/>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com