knackered media/mau, both router say the naum is shot. try new ports on the
mau, check for good connections etc.
Andy
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
m. jean stockton
Sent: 10 June 2000 13:07
To: Matt Shell; [EMAIL PROTECTED]
Subject: RE: Token ring question
I am very new at this but I do not see your 'no shut' command.
Makeeda
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Matt Shell
Sent: Saturday, June 10, 2000 12:31 AM
To: [EMAIL PROTECTED]
Subject: Token ring question
I have two 2502s plugged into an IBM 8228 MSAU in a lab. They are connected
with a 9 pin to Type 1 cable. For some reason, I can't get the line to come
up. When I do "show interface", I see the TokenRing0 as "initializing" and
"down". I wait a second and it goes to "down" / "down", then back to
"initialize" / "down". I admit, I don't know much about Token Ring, but
this should be fairly straight forward, right?
On each router config I have:
RouterA:
!
interface TokenRing0
ip address 192.168.30.1 255.255.255.0
ring-speed 16
!
RouterB:
!
interface TokenRing0
ip address 192.168.30.2 255.255.255.0
ring-speed 16
!
When I do "debug token events" I get this output on both routers:
%TR-3-OPENFAIL: Unit 0, open failed: Phys. Insertion, ring beaconing
%TR-3-BADSTART: Unit 0, Start completion and wrong idb state - state= 0
TR0: reset from 30559AE
TR0: txtmr: 0x0, msclk: 0x146EF494, qt: 0 (0ms)
starting.
Any ideas? Thanks in advance for the help!
Matt
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
