You might just have a bad MAU. Granted, the 8228 is
passive, so this may not be the case. Have you tried
to plug each of them in one at a time? If they both
fail, get another MAU (Known working). The chance that
you have 2 bad 2503s is slim, unless they came from
the same place. Hope this helps.
Regards,
Frank Zahrt, CCNP CCDA
--- "m. jean stockton" <[EMAIL PROTECTED]> wrote:
> I am very new at this but I do not see your 'no
> shut' command.
>
> Makeeda
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> Matt Shell
> Sent: Saturday, June 10, 2000 12:31 AM
> To: [EMAIL PROTECTED]
> Subject: Token ring question
>
>
> I have two 2502s plugged into an IBM 8228 MSAU in a
> lab. They are connected
> with a 9 pin to Type 1 cable. For some reason, I
> can't get the line to come
> up. When I do "show interface", I see the
> TokenRing0 as "initializing" and
> "down". I wait a second and it goes to "down" /
> "down", then back to
> "initialize" / "down". I admit, I don't know much
> about Token Ring, but
> this should be fairly straight forward, right?
>
> On each router config I have:
>
> RouterA:
> !
> interface TokenRing0
> ip address 192.168.30.1 255.255.255.0
> ring-speed 16
> !
>
> RouterB:
> !
> interface TokenRing0
> ip address 192.168.30.2 255.255.255.0
> ring-speed 16
> !
>
> When I do "debug token events" I get this output on
> both routers:
> %TR-3-OPENFAIL: Unit 0, open failed: Phys.
> Insertion, ring beaconing
> %TR-3-BADSTART: Unit 0, Start completion and wrong
> idb state - state= 0
> TR0: reset from 30559AE
> TR0: txtmr: 0x0, msclk: 0x146EF494, qt: 0 (0ms)
> starting.
>
> Any ideas? Thanks in advance for the help!
> Matt
>
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
