Or perhaps the TR port is not initialized in the MAU? There is a gizmo that
contains a battery that will do that.
Bert
Rich Russell wrote:
> Either your mau is bad or your type 1 is bad or you token ring port is bad
> on your router.
>
> Since your router doesn't show the token ring port in reset, your router
> port isn't bad. That leaves the other 2. You might also try to set the
> port speed to 4 instead of 16
>
> Good luck
>
> --
> Rich Russell
> www.thetestpage.net Free study tests
>
> "Matt Shell" <[EMAIL PROTECTED]> wrote in message
> 8hsfuj$vfr$[EMAIL PROTECTED]">news:8hsfuj$vfr$[EMAIL PROTECTED]...
> > I have two 2502s plugged into an IBM 8228 MSAU in a lab. They are
> connected
> > with a 9 pin to Type 1 cable. For some reason, I can't get the line to
> come
> > up. When I do "show interface", I see the TokenRing0 as "initializing"
> and
> > "down". I wait a second and it goes to "down" / "down", then back to
> > "initialize" / "down". I admit, I don't know much about Token Ring, but
> > this should be fairly straight forward, right?
> >
> > On each router config I have:
> >
> > RouterA:
> > !
> > interface TokenRing0
> > ip address 192.168.30.1 255.255.255.0
> > ring-speed 16
> > !
> >
> > RouterB:
> > !
> > interface TokenRing0
> > ip address 192.168.30.2 255.255.255.0
> > ring-speed 16
> > !
> >
> > When I do "debug token events" I get this output on both routers:
> > %TR-3-OPENFAIL: Unit 0, open failed: Phys. Insertion, ring beaconing
> > %TR-3-BADSTART: Unit 0, Start completion and wrong idb state - state= 0
> > TR0: reset from 30559AE
> > TR0: txtmr: 0x0, msclk: 0x146EF494, qt: 0 (0ms)
> > starting.
> >
> > Any ideas? Thanks in advance for the help!
> > Matt
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
