http://www.cisco.com/warp/public/474/index.shtml
You will find everything you need here.
Good Luck,
George H. York
CNE, CCNA
Robert McIntire wrote:
> I'm working with a used 2514 router with an unknown enable password.
> I've tried the standard break technique but can't abort the boot
> sequence. I believe that break may be disabled. I'm using Win NT 4
> and hyperterminal to connect to the console port and am able to
> connect and SHOW VERSION. I am getting terminal feedback. I've used
> CTRL-BREAK AND CTRL-SHFT-6 to no avail. How can I access ROMMON mode
> and change the password? Is there a jumper on the system board that
> can be used to circumvent the password and access the router for
> configuration? Any advice is appreciated, Thanks
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
