On 10 Oct 2000 23:27:27 -0400, Robert McIntire <[EMAIL PROTECTED]> wrote:
:I'm working with a used 2514 router with an unknown enable password. =
:I've tried the standard break technique but can't abort the boot =
:sequence. I believe that break may be disabled. I'm using Win NT 4 and =
:hyperterminal to connect to the console port and am able to connect and =
:SHOW VERSION. I am getting terminal feedback. I've used CTRL-BREAK =
:AND CTRL-SHFT-6 to no avail. How can I access ROMMON mode and change =
:the password? Is there a jumper on the system board that can be used to =
:circumvent the password and access the router for configuration?
: Any advice is appreciated, Thanks
This is almost certainly your terminal emulator and not the router.
Download a freeware terminal program such as Teraterm. The BREAK sequence
in Hyperterminal is buggy and inconsistent from version to version.
The shareware program CRT is also quite good.
[Redundant HTML goo snipped, please turn it off.]
--
Jay Hennigan - Network Administration - [EMAIL PROTECTED]
NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
WestNet: Connecting you to the planet. 805 884-6323
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]