A VLAN trunk can only be configured on a Fast-Ethernet or Gig-Ethernet
interface. The 2611 of course is only 10MB interface.
Chris Lemagie
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sean Graham
Sent: Tuesday, March 27, 2001 10:34 AM
To: [EMAIL PROTECTED]
Subject: Using a 2611 as an ISL router for a 2924 switch
The first question I have..is the above possible with a 2611 router with a
Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2
Wic-1T serial cards.
The Cisco web site has configuration examples based on 2620's but doesn't
mention the 2611. I have had this working using a 3620 OK. But am not able
to get this working using the 2611 I am receiving various errors on both the
router and the switch.
I am wondering as the config is fairly straight forward is this actually
possible with this router.
Any thoughts would be appreciated
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
