Ok, I give up...what is a 2621 then if the FE doesn't work on the 2600
series ?
----- Original Message -----
From: "Kevin Wigle" <[EMAIL PROTECTED]>
To: "cisco" <[EMAIL PROTECTED]>
Cc: "Sean Graham" <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 11:21 AM
Subject: Re: Using a 2611 as an ISL router for a 2924 switch
> ahhh, my favorite thread is back.........
>
>
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/net_m
> od2/ovrnetm.htm#14116
>
> says that a FE module is not supported in the 2600 series.
>
> It doesn't say it won't work but it does says it's not supported. If you
> try to configure
>
> That's why the 2620's are quoted - they have 10/100 ports as part of their
> base config.
>
> But you could be mislead by:
>
> http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm
>
> But, if you read the doc there is a table that says that none of the FE
> modules are avail for the 2600 series.
>
> Also, if you go here:
>
> http://www.cisco.com/pcgi-bin/finder/msbsearch.pl
>
> and use "Search#2" and search on NM-1FE-TX the results show the module and
> report and say that it is not available for the 2600 series. But it is ok
> with 3600 series routers.
>
> Take a look at http://www.cisco.com/go/module for all your questions on
> 2600/3600 routers.
>
>
> Yeah, we've had this discussion before.
>
> If a reseller sold you this module expressly for the 2611, return it. If
> they sold it to you for a 3600 and you decided to try it in the 2611 -
well,
> you got the results that CCO predicts.
>
> Kevin Wigle
>
>
>
> "Sean Graham" <[EMAIL PROTECTED]> wrote in message
> 99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]...
> > The first question I have..is the above possible with a 2611 router with
a
> > Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2
> > Wic-1T serial cards.
> >
> > The Cisco web site has configuration examples based on 2620's but
doesn't
> > mention the 2611. I have had this working using a 3620 OK. But am not
able
> > to get this working using the 2611 I am receiving various errors on both
> the
> > router and the switch.
> >
> > I am wondering as the config is fairly straight forward is this actually
> > possible with this router.
> >
> > Any thoughts would be appreciated
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
