Regarding to Kevin's link, cisco 2600 series will not support fast ethernet
module.
All you can do is that you can play around 802.1q trunking with your 2924xl.
""Sean Graham"" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó
99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]...
> The first question I have..is the above possible with a 2611 router with a
> Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2
> Wic-1T serial cards.
>
> The Cisco web site has configuration examples based on 2620's but doesn't
> mention the 2611. I have had this working using a 3620 OK. But am not able
> to get this working using the 2611 I am receiving various errors on both
the
> router and the switch.
>
> I am wondering as the config is fairly straight forward is this actually
> possible with this router.
>
> Any thoughts would be appreciated
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
