I would check the IOS feature set next. You will need IP Plus at a minimum
to enable VLAN routing..
Chris Lemagie
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sean Graham
Sent: Tuesday, March 27, 2001 11:19 AM
To: [EMAIL PROTECTED]
Subject: Re: Using a 2611 as an ISL router for a 2924 switch
I am using a FastEthernet 100mbp module. I used the same one in a 3620 which
did work.
""Chris Lemagie"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> A VLAN trunk can only be configured on a Fast-Ethernet or Gig-Ethernet
> interface. The 2611 of course is only 10MB interface.
>
> Chris Lemagie
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Sean Graham
> Sent: Tuesday, March 27, 2001 10:34 AM
> To: [EMAIL PROTECTED]
> Subject: Using a 2611 as an ISL router for a 2924 switch
>
>
> The first question I have..is the above possible with a 2611 router with a
> Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2
> Wic-1T serial cards.
>
> The Cisco web site has configuration examples based on 2620's but doesn't
> mention the 2611. I have had this working using a 3620 OK. But am not able
> to get this working using the 2611 I am receiving various errors on both
the
> router and the switch.
>
> I am wondering as the config is fairly straight forward is this actually
> possible with this router.
>
> Any thoughts would be appreciated
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
