ahhh, my favorite thread is back.........
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/net_m
od2/ovrnetm.htm#14116
says that a FE module is not supported in the 2600 series.
It doesn't say it won't work but it does says it's not supported. If you
try to configure
That's why the 2620's are quoted - they have 10/100 ports as part of their
base config.
But you could be mislead by:
http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm
But, if you read the doc there is a table that says that none of the FE
modules are avail for the 2600 series.
Also, if you go here:
http://www.cisco.com/pcgi-bin/finder/msbsearch.pl
and use "Search#2" and search on NM-1FE-TX the results show the module and
report and say that it is not available for the 2600 series. But it is ok
with 3600 series routers.
Take a look at http://www.cisco.com/go/module for all your questions on
2600/3600 routers.
Yeah, we've had this discussion before.
If a reseller sold you this module expressly for the 2611, return it. If
they sold it to you for a 3600 and you decided to try it in the 2611 - well,
you got the results that CCO predicts.
Kevin Wigle
"Sean Graham" <[EMAIL PROTECTED]> wrote in message
99qqjt$3me$[EMAIL PROTECTED]">news:99qqjt$3me$[EMAIL PROTECTED]...
> The first question I have..is the above possible with a 2611 router with a
> Fast Ethernet module install, with 48MB DRAM and IOS 12.1. It also has 2
> Wic-1T serial cards.
>
> The Cisco web site has configuration examples based on 2620's but doesn't
> mention the 2611. I have had this working using a 3620 OK. But am not able
> to get this working using the 2611 I am receiving various errors on both
the
> router and the switch.
>
> I am wondering as the config is fairly straight forward is this actually
> possible with this router.
>
> Any thoughts would be appreciated
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
