Dear Singh, it is already there.
Shoaib
--- Vivek Singh wrote:
> Shoaib, y don't u add static routes...?
>
> -----Original Message-----
> From: Shoaib Waqar [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 01, 2001 5:25 PM
> To: [EMAIL PROTECTED]
> Subject: Re: ISDN BRI up but does not ping [7:2712]
>
>
> Hi Dave,
> I am using EIGRP as routing protocol, but this will
> come into account when i have to reach the remote
> LAN,
> rite now EIGRP is initiating DDR, i m testing for
> dial
> backup, offcourse when the communication will begin,
> my task would be just to add two commands on the
> primary link. The issue is that 'show int bri 2/0 1'
> also shows the bri B channel as UP but the two peers
> dont ping each other, i think there is no need of a
> routing protocol rite now at this stage. For pinging
> to your neighbor of same subnet which is directly
> connected, u dont need a routing protocol. Now wat
> to
> do ???
>
> Shoaib
>
>
> --- [EMAIL PROTECTED] wrote:
> >
> > Hi Shoaib
> > What type of routing protocol are you using ?
> > Have you put the static
> > routes in on both sides ? Can you ping from DIaler
> > to Dialer interface ?
> >
> > Dave
> >
> >
> >
> >
>
> >
>
> >
> > "Shoaib
>
> >
>
> >
> > Waqar" To:
> > [EMAIL PROTECTED]
>
> >
> >
>
> >
> > yahoo.com> Subject:
>
> > ISDN BRI up but does not ping [7:2712]
>
> >
> > Sent by:
>
> >
>
> >
> > nobody@groups
>
> >
>
> >
> > tudy.com
>
> >
>
> >
> >
>
> >
>
> >
> >
>
> >
>
> >
> > 01/05/01
>
> >
>
> >
> > 09:15
>
> >
>
> >
> > Please
>
> >
>
> >
> > respond to
>
> >
>
> >
> > "Shoaib
>
> >
>
> >
> > Waqar"
>
> >
>
> >
> >
>
> >
>
> >
> >
>
> >
>
> >
> >
> >
> >
> >
> > I am getting trouble in ISDN bri link. I have a
> > Central site Router 3640 with 12.1.8 IP/IPX plus
> > IOS.
> > the route has 4 port BRI module. The remote site
> is
> > having 2503, all u know that it has 1 port BRI.
> > remote
> > site is running 11.2.1 version of IOS. The call is
> > placed using simple DDR commands as:
> >
> > Cisco 3640 Router
> > =================
> > Int bri 2/0
> > ip add 130.1.1.1 255.255.255.0
> > encap ppp
> > dialer idle-timeout 300
> > dialer fast-idle 300
> > dialer string xxxxxxxx
> > dialer-group 1
> >
> > Remote site (2503):
> > ===================
> >
> > Int bri 0
> > ip add 130.1.1.2 255.255.255.0
> > encap ppp
> > dialer idle-timeout 300
> > dialer fast-idle 300
> >
> > In this scenario, a/c to customer need, the
> central
> > site is placing call.When the call has placed, and
> > we
> > see the debug output, it shows all the debug of
> ppp
> > negotiations and ISDN events as correct, with the
> > install route at the end. When i run 'show isdn
> > status' it shows me all layers up with one active
> > layer 3 call also. Also 'show isdn active' gives
> me
> > successful call to remote site. So nothing seems
> to
> > be
> > wrong with config. THE problem is that after
> > connectivity when i try to ping from central site
> > the
> > remote site ip address, it times out. I took the
> > 'show
> > ip route', and it gives me only connected routes
> but
> > dont show me the remote LAN network address of
> each
> > site which it should give as i m running EIGRP at
> > both
> > sites. The primary link is working correctly as i
> > have
> > an SCPC 128K link between the two sites as well
> and
> > showing correct routes. The switch type in
> pakistan
> > normally we use is basic-net3 (SIEMENS switch).
> Can
> > anyone plzz help me, where is the issue?? i have
> > tried
> > everything, dialer profiles and all. but nothing
> > seems
> > to be working, i cant ping the other side thru
> BRI.
> >
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2734&t=2712
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]