yeah i would love to see focus put on current popular technologies, not
those used by a small minority.
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Wed, 9 May 2001, Chuck Larrieu wrote:
> I hope I hope I hope I hope ( and all you folks who've been through the Lab
> know EXACTLY what I'm talking about ;-> )
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
> Eugene Nine
> Sent: Wednesday, May 09, 2001 6:20 PM
> To: [EMAIL PROTECTED]
> Subject: Re: CCIE prep - review lab inventory and budget [7:3908]
>
> So whats so special about the 3920? The only thing I see is Joken ring.
> I'm just starting my CCNP so IE is realistically a year out. Do you think
> with the rate companies are ditching joken ring gear it will still be on
the
> test by then. Crapple talk has gone pretty much gone away.
> Eugene
>
> ""Darren Crawford"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I've said it before and I'll say it again. Get yourself a 3920. You
will
> > see
> > in the lab.
> >
> > Darren
> >
> > At 07:24 PM 05/09/2001 -0400, Eugene Nine wrote:
> > >Here's what I have so far:
> > >2524 w/ 1 4 in one module
> > >2516
> > >2507
> > >2 DTE cables and 1 DCE cable
> > >all above for $1843 (bought it all in one purchase because I had $1900
to
> > >spend)
> > >One 10U desktop rack $55
> > >
> > >Next I'm thinking one of the access servers to setup the reverse telnet
> > >deal.
> > >Eugene
> > >
> > >
> > >""Fred Danson"" wrote in message
> > >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > >> I have a similar setup, here's what mine cost me (without shipping)-
> > >>
> > >> 2501- $550
> > >> 2502- $404
> > >> 2503- $630
> > >> 2504- $540
> > >> 2511- $900
> > >> 2523- $900
> > >> Cat1800 Token Switch- $300
> > >> 4000 w/2 ethernet, 1 token, 2 serial, 4 BRI- $1000
> > >> ISDN Simulator- $1800
> > >>
> > >> Total- $7024 (without shipping)
> > >>
> > >> I bought all of my equipment from ebay. Where are you planning on
> buying
> > >> yours from? Also, why would you need 4 hubs when you have a switch?
You
> > >> could easily make the switch act like a number of hubs by creating
> VLANS.
> > >>
> > >> If you have any questions, feel free to email me.
> > >>
> > >> Fred
> > >>
> > >> >From: "EA Louie"
> > >> >Reply-To: "EA Louie"
> > >> >To: [EMAIL PROTECTED]
> > >> >Subject: CCIE prep - review lab inventory and budget [7:3908]
> > >> >Date: Wed, 9 May 2001 18:09:22 -0400
> > >> >
> > >> >I'm getting ready (or in Texas, I'd be "a-fixin to git ready") to
> build a
> > >> >CCIE
> > >> >lab prep setup, both for personal use and for the use of my local
> > >> >studygroup.
> > >> >Here's what I've identified - if I'm missing anything, please let me
> > >know.
> > >> >
> > >> >Here's the strategy I'm going to take for the equipment:
> > >> >
> > >> >1-2511 --- console server (w/ octal cable)
> > >> >1-2503 --- ISDN
> > >> >1-2504 --- ISDN
> > >> >1-2514 - dual eth
> > >> >1-2515 - dual t/r
> > >> >1-4000 w/NP-4T and NP-1E or NP-2E, and a BRI interface or two if they
> > >exist
> > >> >(F/R switch)
> > >> >1-2924-XL
> > >> >teltone isdn simulator
> > >> >3 token ring MAUs
> > >> >3 token ring media filters
> > >> >4 AUI-10BT transceivers
> > >> >4 Ethernet hubs
> > >> >6 60-pin DTE-DCE cables
> > >> >a bunch of Cat5 cables
> > >> >rack
> > >> >rackmount kits (or shelves)
> > >> >and a partridge in a pear tree ;-)
> > >> >
> > >> >I'm budgeting about $4000 and if an additional 2501 falls into my
> > >> >possession
> > >> >by accident,
> > >> >so be it ;-)
> > >> >
> > >> >That should provide most of what's needed and enough of the interface
> > >types
> > >> >required to
> > >> >practice configurations (especially desktop protocols and iBGP/eBGP).
> > >I'd
> > >> >love a Cat5k too, but I can't do it on this budget.
> > >> >
> > >> >What do you think about this parts list? Pretty good for a start?
> Think
> > >> >it's
> > >> >achievable with $4000?
> > >> >
> > >> >-e-
> > >> >FAQ, list archives, and subscription info:
> > >> >http://www.groupstudy.com/list/cisco.html
> > >> >Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > >>
> > >> _________________________________________________________________
> > >> Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >> FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> >
>
****************************************************************************
> > ***********************************
> > Darren S. Crawford
> > Lucent Technologies Worldwide Services
> > 2377 Gold Meadow Way Phone: (916) 859-5200 x310
> > Suite 230 Fax: (916) 859-5201
> > Sacramento, CA 95670 Pager: (800) 467-1467
> > Email: [EMAIL PROTECTED] Epager: [EMAIL PROTECTED]
> > http://www.lucent.com Network Systems
> > Consultant - CCNA, CCIE Written
> >
> > "Providing the Power Operable Networks."
> >
> >
>
****************************************************************************
> > ***********************************
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3934&t=3908
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
