what is the overall goal? >>> Gaz 03/04/02 03:06PM >>> Hi all,
Has anybody tried NAT'ing two outside addresses to one internal (DMZ) address on the same port (80) in some way. Not too difficult to get round, as I can get the DNS of one site changed and use the single address outside to single inside. The advantage would be that when the web sites are separated, to two machines inside, I would like to be able to change the pix settings immediately rather than change DNS and wait a couple of days for DNS to propagate. I'm sure there may be some simple way of doing it, but I couldn't find it whilst playing about today. Any ideas welcome. Thanks, Gaz >>>>>>>>>>>>> Confidentiality Disclaimer <<<<<<<<<<<<<<<< This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37192&t=37179 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]