pix will respond with error if you do more than 1 static command (specify more than one public > private translation, using the static command). Pix dosent offer "extendable" either
(im running 6 train on the pix) Joseph Brunner ASN 21572 MortgageIT MITLending New York, NY 10038 (212) 651 - 7695 Voice (212) 651 - 7795 Fax -----Original Message----- From: Hire, Ejay [mailto:[EMAIL PROTECTED]] Sent: Monday, March 04, 2002 3:52 PM To: [EMAIL PROTECTED] Subject: RE: Pix NAT - Two to one [7:37179] On a cisco router, you use the Extendable command. not sure about the pix. -----Original Message----- From: Gaz [mailto:[EMAIL PROTECTED]] Sent: Monday, March 04, 2002 3:07 PM To: [EMAIL PROTECTED] Subject: Pix NAT - Two to one [7:37179] Hi all, Has anybody tried NAT'ing two outside addresses to one internal (DMZ) address on the same port (80) in some way. Not too difficult to get round, as I can get the DNS of one site changed and use the single address outside to single inside. The advantage would be that when the web sites are separated, to two machines inside, I would like to be able to change the pix settings immediately rather than change DNS and wait a couple of days for DNS to propagate. I'm sure there may be some simple way of doing it, but I couldn't find it whilst playing about today. Any ideas welcome. Thanks, Gaz Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37200&t=37179 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
