Adding a second IP to the internal host is the only way I know of useing the PIX.
""Rich"" wrote in message news:[EMAIL PROTECTED].; > Why not add an additional ip to the internal host and have two nats? > > ----- Original Message ----- > From: "Gaz" > To: > Sent: Monday, March 04, 2002 3:06 PM > Subject: Pix NAT - Two to one [7:37179] > > > > Hi all, > > > > Has anybody tried NAT'ing two outside addresses to one internal (DMZ) > > address on the same port (80) in some way. > > Not too difficult to get round, as I can get the DNS of one site changed > and > > use the single address outside to single inside. > > The advantage would be that when the web sites are separated, to two > > machines inside, I would like to be able to change the pix settings > > immediately rather than change DNS and wait a couple of days for DNS to > > propagate. > > I'm sure there may be some simple way of doing it, but I couldn't find it > > whilst playing about today. > > > > Any ideas welcome. > > > > Thanks, > > > > Gaz Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37225&t=37179 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
