Why not add an additional ip to the internal host and have two nats? ----- Original Message ----- From: "Gaz" To: Sent: Monday, March 04, 2002 3:06 PM Subject: Pix NAT - Two to one [7:37179]
> Hi all, > > Has anybody tried NAT'ing two outside addresses to one internal (DMZ) > address on the same port (80) in some way. > Not too difficult to get round, as I can get the DNS of one site changed and > use the single address outside to single inside. > The advantage would be that when the web sites are separated, to two > machines inside, I would like to be able to change the pix settings > immediately rather than change DNS and wait a couple of days for DNS to > propagate. > I'm sure there may be some simple way of doing it, but I couldn't find it > whilst playing about today. > > Any ideas welcome. > > Thanks, > > Gaz Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37199&t=37179 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]