I love the idea but I have a mast wrap that the prior owner provided.  Its 
amazing how such a simple device can warm up the cabin.

I have other ventilation...so if you do too, I would heartily recommend a mast 
wrap.

David F. Risch
1981 40-2
(401) 419-4650 (cell)


Date: Tue, 10 Jun 2014 20:13:23 +0000
To: johnpr...@comcast.net; cnc-list@cnc-list.com
Subject: Re: Stus-List Fwd: C&C question
From: cnc-list@cnc-list.com

Would it work better to put the holes below the floorboards, to suck air from 
the bilge?


Chuck
Resolute
1990 C&C 34R
Broad Creek, Magothy River, Md
From: "CNC boat owners, cnc-list" <cnc-list@cnc-list.com>
To: "David Knecht" <davidakne...@gmail.com>, "CNC boat owners, cnc-list" 
<cnc-list@cnc-list.com>
Sent: Monday, June 9, 2014 10:02:38 PM
Subject: Re: Stus-List Fwd: C&C question

Yup – sure can.  They are an ingenious way to ensure good ventilation below.  
The mast acts like a chimney especially on not days.  The holes suck out cabin 
air and it exits at the mast head.  Air gets in to the cabin through the main 
cabin hatch and engine vents.  Never had a problem with musty air below decks 
Cheers  John and MaryannLegacy III1982 C&C 34Noank, CT From: CnC-List 
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht via CnC-List
Sent: Monday, June 09, 2014 9:26 PM
To: CnC CnC discussion list
Subject: Stus-List Fwd: C&C question I got this from a friend who is looking 
for a new boat.  Can someone clarify what the holes are for?  Thanks- Dave 
Aries1990 C&C 34+New London, CT
 Begin forwarded message:


From: "jwstah...@comcast.net" <jwstah...@comcast.net>Subject: C&C questionDate: 
June 9, 2014 at 4:27:21 PM EDTTo: "F5, David" <davidakne...@gmail.com> Hi 
Dave,I've looked at 3 C&Cs now, and each of them has a number (6 or 8) of 1/4" 
holes drilled in the mast section just below the mast boot in the cabin, port 
side only.  The first time I saw this, I was concerned about the strength of 
the section.  After seeing three, however, I believe there must be a good 
reason for the holes.  Is it a way to control humidity within the section?  Is 
there another reason?  Is it something I should be concerned about?Thanks,John 





        
                
                        
                                
                        
                
                
                        
                                This email is free from viruses and malware 
because avast! Antivirus protection is active.
                        
                
        




_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com



_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com                      
                  
_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to