Chuck,
At the very bottom of the Photo Album’s Brochures page under New Additions, are a couple pdf files of 25 mk1 info. I might have something in my archives too, I’ll look through them tonight. Rick Taillieu Nemesis '75 C&C 25 #371 Shearwater Yacht Club Halifax, NS. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via CnC-List Sent: November-07-15 23:31 To: CNC boat owners, cnc-list Cc: Chuck S Subject: Stus-List C&C 25 MkI Hi Rick, I'm curious about the 25 model. I looked thru the brochures on the cncphotoalbum.com site and did not find the MkI '73 or '75 C&C 25 listed. The brochures appear to be 80's vintage. I think our local yard has MkI 25? It has a cabin top that fairs into the foredeck, no bump, and a very swept back keel. Anybody have the brochure for this model? Chuck Resolute 1990 C&C 34R Broad Creek, Magothy River, Md _____ From: "Rick Brass via CnC-List" <cnc-list@cnc-list.com> To: cnc-list@cnc-list.com Cc: "Rick Brass" <rickbr...@earthlink.net> Sent: Saturday, November 7, 2015 9:44:50 PM Subject: Re: Stus-List Keel attachment issues on a C&C 25 >From the pictures you sent, it appears that the fiberglass layup is virtually >identical to the layup in my early 1975 model. I have the same raised area of >fiberglass under one of the keel bolts, and also the same strip if roving >athwart the bilge and extending up under the cockpit sole. I am interested in the irregular hole in the sole that you show in photo #1. My bilge is accessed through a long rectangular opening in the sole, and the edges of the sole are recessed to take a rectangular teak board. So all of my keel bolts are accessible through the same rectangular opening. When I bought Belle in May, 1994 she had a C&C smile – though I did not know what that was at the time. On someone’s recommendation I opened up the crack, laid in sealant (maybe 5200?), faired over the sealant, and finished painting the bottom. When I hauled out that October, the smile was back. Belle also has rust in the bilge. My keel nuts were stainless, but there were what was left of galvanized washers under the nuts. I can’t quite determine if your keel nuts are stainless or galvanized – but the keel bolts and nuts on Belle were obviously clean stainless and still pretty shiny as I recall. Anyway, over the first winter I discovered a precursor to this list and learned about the C&C smile and proper keel bolt torque. I had some new stainless backing plates made from stainless (3/16” or ¼” thick) and before the spring launch I replaced all the rusted backing plates with stainless (one bolt at a time) and properly torqued the keel bolts. Then re-faired the smile and applied bottom paint. I re-torqued the bolts during a haul out in about 2003 or 2004 (they did not seem to have loosened any in the intervening 8 or 9 years). When Belle was last hauled a couple of years ago, there was still no evidence of a smile. Rick Brass Imzadi C&C 38 mk 2 la Belle Aurore C&C 25 mk1 Washington, NC _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6173 / Virus Database: 4457/10964 - Release Date: 11/07/15
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com