Teleflex II is what I used. They were basically drop in replacements. Got 'em from West Marine. Pull one to get the length. Leave the other as a fish for the 2 new ones.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Nov 8, 2015 9:26 PM, "John and Maryann Read via CnC-List" < cnc-list@cnc-list.com> wrote: > Have removed the shift and throttle cables as they were stiff and had > excessive resistance. Not surprising as they are OEM and 33 years old. > Any thoughts on suitable replacement and where to purchase?? > > > > On a related note, our Yanmar 3GM throttle has a built in internal spring > that applies increasing resistance as the throttle is opened more. The OEM > fix was to put an adjustable crimp in the cable but that seems less than > ideal. Any thoughts as to how to offset the internal spring?? > > > > Many thanks for your thoughts > > > > John & Maryann > > Legacy III > > 1982 C&C 34 > > Noank, CT > > > ------------------------------ > [image: Avast logo] <https://www.avast.com/antivirus> > > This email has been checked for viruses by Avast antivirus software. > www.avast.com <https://www.avast.com/antivirus> > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
