Stopped by the local HD this morning. First, they greatly expanded the automotive section and oils/solvents. Picked up a gallon of the ZEP citrus based degreaser and a couple paint buckets. I'll drop a winch in tonight and see what happens. Luckily, there is a utility sink in the garage, so the admiral won't see the mess.
I'll report back on my success/failure. Joel On Wed, Jan 18, 2017 at 9:52 AM, John Rand via CnC-List < cnc-list@cnc-list.com> wrote: > I just used mineral spirits and a tooth brush. > > John > > On Tue, Jan 17, 2017 at 2:54 PM, Joel Aronson via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I removed two of my mast mounted winches as they are overdue for service >> (about 25 years overdue). That was a job in itself, as the bolts had fused >> to the aluminum mounting plates. A combination of PB Blaster, vinegar and >> acetone, along with a hammer and screwdrivers got them off. >> >> The grease is a gummy mess. Any recommendations on a non-flammable >> solvent I can soak them in? I'm working in the garage, so diesel and >> kerosene are out. >> >> Joel >> >> >> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> >> > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!