I just used mineral spirits and a tooth brush. John
On Tue, Jan 17, 2017 at 2:54 PM, Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > I removed two of my mast mounted winches as they are overdue for service > (about 25 years overdue). That was a job in itself, as the bolts had fused > to the aluminum mounting plates. A combination of PB Blaster, vinegar and > acetone, along with a hammer and screwdrivers got them off. > > The grease is a gummy mess. Any recommendations on a non-flammable > solvent I can soak them in? I'm working in the garage, so diesel and > kerosene are out. > > Joel > > > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!