Make sure you measure the overhead clearance. You may need to put an elbow on the fill nozzle.
Some plastic tanks have angled fill nozzles. All things to look at. I heartily support switching to plastic tanks IF your existing tank is not Monel. If you have a Monel tank, keep it. Excellent time to replace the fill hose also. Dennis C. Sent from my iPhone > On Nov 15, 2018, at 11:25 AM, Edward Levert via CnC-List > <cnc-list@cnc-list.com> wrote: > > Richard: > > Measure your existing tank. Then check the Moeller web site for a compatible > plastic tank. USCG approved. Ordered from Amazon. Fit like a glove. > > Ed Levert > C&C 34 Briar Patch > New Orleans > > Sent from my iPhone > >> On Nov 15, 2018, at 10:57 AM, Richard Bush via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> Bill, I like your thoughts on the plastic tanks...are these something >> readily available in standard sizes or do they have to be individually >> fabricated?...either way, what/where would you recommend for sourcing one? >> Thanks >> >> Richard >> s/v Bushmark4: 1985 C&C 37; Ohio River, Mile 596; >> >> Richard N. Bush >> 2950 Breckenridge Lane, Suite Nine >> Louisville, Kentucky 40220-1462 >> https://www.paypal.me/stumurray >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
