Dennis,
Here's some pics, and yes, the stbd side wire is a PO kludge, - the wire
clamps, eye bolt, etc. Your thread's got me looking at it, time to add
it to the project list.
https://photos.app.goo.gl/4yE5o2R9T5ZxEDCy7
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 1/24/2019 11:47 AM, Dennis C. via CnC-List wrote:
Joe,
Some pictures would be appreciated. No hurry. I won't tackle this
job until after my ski trip (all of February).
Dennis C.
On Thu, Jan 24, 2019 at 8:05 AM Della Barba, Joe via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
I would also put the original stops back. The bolt system is IMHO
sub-optimal at best.
I can send some photos and dimensions.
Joe
Coquina
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray