So I took the handrail inside the cabin off, exposed the holes hidden, I assume those are for the handrail outside the cabin. There seems to be no screws in those holes. Is the outside handrail attached to the cabin with screws or something? Mine isn’t coming off yet.
Thx Bo On Mon, Mar 29, 2021 at 12:21 WILLIAM WALKER via CnC-List < cnc-list@cnc-list.com> wrote: > Agree, I said glue but always use varnish. > Bill Walker > > On Monday, March 29, 2021, 06:47:16 AM EDT, James Hesketh via CnC-List < > cnc-list@cnc-list.com> wrote: > > > > > WILLIAM wrote: > > snip >> > > After the glue dries use a Sharp chisel to level, a little sandpaper and > the apply finish. > > > I'd always been told it's better to set bungs (the plugs) by dipping them > in varnish before tapping them into place. That way, the varnish will act > as a waterproofer and semi-adhesive, but then they can be removed easily > next time. With glue they would need to be drilled out. > > Jim Hesketh > C&C 26 Whisper > Miami, FL > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - > Stu > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu