I use a KR5L switch, but can no longer find on the internet. Possibly there is a circuit available that you could duplicate. I use mine to select rigs and a choice of Two amps, I only have one.
73, Bill K9YEQ https://wrj-tech.com/ -----Original Message----- From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On Behalf Of Charlie Wirth Sent: Sunday, March 17, 2019 3:27 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Using Elecraft KPA-1500 for 2 radios I own a Flex 6400 and an Icom 7700. I currently have the amplifier connected to the Flex. There may be times I want to use the Icom 7700. Other than disconnecting the send and control cables from the 1500 that go to the Flex and plugging in the same cables from the 7700 is there any other way to have both sets of cables connected to the amplifier safely? I would only be using one radio at a time and the other one would be turned off. I know that I would have to go into the menu settings of the amplifier to change the baud radio and radio when I use the other radio. Thanks, Charlie W3DDF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
