i use topten a/b coax switches,,,, to switch between the kpa500 &
acom 2000 ... one in front of the amps , one in back .... also have
them switching between K3 & an Icom....
https://toptendevices.com/products/ab-station-selector/
On 3/17/2019 8:56 PM, j...@kk9a.com wrote:
So the different voltage sources from each amp do not bother each other when
connected together with a Y or was only one amp turned on at a time?
John KK9A
Jim Brown K9YC wrote:
<snip>
Most of the rigs I've owned use a short on the key line to key the amp.
If both of yours do that, you can probably connect them in parallel to
the Key input of the power amp using an RCA Y-cable. I've done that for
years to switch my K3 between my KPA500 and a 1500w tube amp (for many
years a Ten Tec Titan, now an 87A).
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html